User: Trep21, Location: New york
Asked on: Thursday, November 14, 2024 at 9:43 pm EST
Answered on: Thursday, March 6, 2025 at 5:15 am EST
Question: I was doing some practice code questions. There’s was one question that asked. If you have two blue leads what would the voltage be across them?Is 208v correct ?
No, 208V is likely not correct for the voltage across two blue leads in a standard electrical system. Here's why, and what the likely voltage would be: Understanding Electrical Systems
In a standard three-phase electrical system (common in commercial and industrial settings), the colors of the wires typically indicate:
Black
Hot (Live) wire
Red
Hot (Live) wire
Blue
Hot (Live) wire in some systems
White
Neutral wire
Green (or bare copper)
Ground wire
Voltage Between Phases (Hot Wires)
If two blue wires are used as hot wires in a three-phase system: The voltage across them will depend on the phase voltage within that system.
Likely Scenario and Voltage
Assuming each hot wire is 120V to the neutral: You would measure around 208 V between any two of the hot wires (e.g., between a black and a red wire, or between two blue wires).
Important Considerations
Color Codes Can Vary
Electrical color codes can vary by region and specific installation. It is essential to confirm the color codes for the specific location.
Never Assume
Never assume the voltage of a wire based on its color. Always use a properly calibrated voltmeter to measure the voltage.* Safety First: Electrical work can be dangerous. If you are not a qualified electrician, do not attempt to work on electrical systems. Always turn off the power at the breaker before working on any electrical circuits. Flag for review