Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Panel under downspout

User: Chrioli, Location: New Mexico

Asked on: Saturday, November 16, 2024 at 5:40 am EST
Answered on: Thursday, March 6, 2025 at 5:18 am EST

Question: An electrician put a new panel under the down spout from a flat roof. The spout is 3 feet above the panel. How can I fix this? Can I put a roof over the panel?

This is a problem that needs to be addressed urgently. Water and electricity are a dangerous combination. Here's a breakdown of how to fix it, focusing on safety and potential solutions

Why This Is Dangerous
Direct Water Contact

Water flowing directly from a downspout onto an electrical panel is a severe electrical hazard. It can cause short circuits, corrosion, and potentially energize the panel enclosure, creating a shock hazard.


Code Violations

Electrical codes (like the NEC in the US) have strict requirements for clearances and protection of electrical equipment from weather and water. This installation almost certainly violates code.

Long-Term Damage

Even without immediate failure, constant water exposure can lead to premature corrosion and failure of the panel and its components.

Immediate Actions (Safety First!)
1. Caution

DO NOT touch the electrical panel, especially if it's raining or the area is wet. Keep children and pets away from the area.2.

Turn Off the Breaker (If Safe)

If you can safely access the main breaker for the electrical panel, turn it OFF. This will de-energize the panel and reduce the risk of electrical shock.

If you're unsure or uncomfortable, skip this step and call an electrician immediately.
3. Contact a Licensed Electrician IMMEDIATELY

This is not a DIY fix. You need a qualified electrician to assess the situation, make the necessary repairs, and ensure the installation meets code. Explain the problem clearly when you call.4.

Contact an appropriate professional to remedy the water source

A roofer or general contractor will need to reroute the water.

Possible Solutions (The Electrician Will Determine the Best Approach)


The best solution will depend on the specific layout and constraints of your property. Here are a few options, keeping in mind that all electrical work must be done by a licensed electrician.1. Relocate the Electrical Panel

This is often the most reliable, though potentially the most expensive, solution. The panel is moved to a location where it's protected from the elements. The new location must still comply with electrical codes (accessible, proper clearances, etc.).2.

Modify the Downspout

Extend the downspout to direct the water far away from the electrical panel. Ensure the extension is properly secured to prevent it from becoming dislodged. A diverter or elbow can be used to change the direction of the water flow. Consider the impact on surrounding areas – you don't want to redirect the water onto a neighbor's property or create other drainage problems.3.

A Roof Over the Panel (with Caveats)

Yes, you can put a roof over the panel, but it MUST be done correctly. The roof needs to be properly engineered and constructed to withstand weather conditions (wind, snow, rain). It must be designed to completely prevent water from reaching the panel, even during heavy rain or wind-driven rain. The roof must not obstruct access to the panel for maintenance and repairs. Most importantly,

the electrician will need to ensure that the installation of the roof does not create new electrical hazards or violate code requirements.
Grounding and bonding considerations will be critical. Consider a custom-built enclosure

A properly designed and sealed enclosure could be a better option than a makeshift roof, providing better protection and potentially being more aesthetically pleasing.4.

Combination of Solutions

It is likely that more than one of the above solutions will be combined in order to prevent water from contacting the panel and remedy the situation appropriately.

Important Considerations
Electrical Codes

Your electrician must adhere to all applicable electrical codes (NEC in the US, or equivalent in your region). This includes proper grounding, bonding, clearances, and protection from the environment.


Permits

Depending on your local regulations, you may need to obtain permits for electrical work and/or structural modifications. Your electrician can advise you on this.*

Documentation

Keep records of all work done, including permits, inspections, and contractor invoices. This will be important for future reference and potential insurance claims.

In summary: This is a serious electrical hazard. Contact a licensed electrician immediately for an evaluation and professional repair. Do not attempt any DIY solutions that could put you or others at risk.
Flag for review

Previous Question Next Question