Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: How far do you go with a Home Inspection laundry list?

User: nizak, Location: Humboldt

Asked on: Saturday, November 16, 2024 at 2:48 pm EST
Answered on: Thursday, March 6, 2025 at 5:18 am EST

Question: Contacted by a Realtor and forwarded an residential inspection report.- Ungrounded receptacles.- Kitchen and bath lacking GFCI- Open junction boxes- Breaker panel wiring a messAll things that are relatively easy to fix.Then I go outside and find that the mast wiring and meter base are only rated for 100 amp.Load center has a 150 amp main .Seems like every time I deal with a home inspection there’s something half assed about it .

You've hit a common nerve with many tradespeople and homeowners! It's frustrating to encounter situations where electrical systems (or other aspects of a house) are a mismatch of components and don't meet current code or best practices.Here's a breakdown of why you're likely feeling this way and what to consider: Inspection Focus & Limitations

Home inspections are
not code compliance inspections. They are visual, general assessments to identify readily apparent issues. Inspectors are looking for safety hazards and major defects. They're not usually pulling off cover plates or doing in-depth load calculations.

"Grandfathering" and Age

Older homes often have electrical systems that were acceptable when installed but don't meet current codes. As long as they were permitted and inspected at the time of installation, they're often "grandfathered in." This doesn't mean they're safe or adequate for modern electrical demands.

DIY and "Handyman" Work

Unfortunately, many homes have been subject to unqualified individuals making electrical repairs and installations. This can create a patchwork of unsafe and non-compliant work.


Varying Inspector Skill and Thoroughness

The quality of home inspections can vary significantly. Some inspectors are more experienced and knowledgeable than others. Some are more meticulous in their examination.

The Pressure to "Close the Deal"

Realtors are incentivized to close deals. While good agents want a safe and sound home for their clients, some may downplay issues to avoid scaring off a buyer. This can subtly influence the way a home inspection report is presented.

Addressing the Specific Issues You Found



Ungrounded Receptacles, Lack of GFCIs, Open Junction Boxes, Messy Panel

These are all common electrical safety concerns. They're relatively easy and inexpensive to fix, but they should be addressed by a qualified electrician.

100-Amp Mast/Meter Base with a 150-Amp Panel

This is a serious mismatch. The panel's potential capacity is higher than the service's ability to deliver power. This could lead to:


Overloading

If the house's electrical load exceeds 100 amps, the main breaker could trip. However, it also might not trip immediately, potentially leading to overheating of the service entrance conductors and the meter base, which could cause a fire.

Voltage Drop

The limited capacity of the service entrance could cause voltage drop under heavy loads, affecting the performance of appliances and electronics.


Potential for Future Problems

Modern homes with air conditioning, electric stoves, and multiple appliances often require more than 100 amps. Upgrading the electrical service is a significant cost but important.

What To Do Next


Get an Electrical Inspection

Hire a licensed electrician to perform a thorough inspection of the electrical system. They can assess the true condition of the wiring, the adequacy of the service, and identify any other potential hazards.2.

Get Quotes for Repairs/Upgrades

Based on the electrician's findings, get multiple quotes for any necessary repairs or upgrades.3.

Negotiate with the Seller

As a buyer, you can use the inspection findings to negotiate with the seller. They may be willing to: Reduce the purchase price to reflect the cost of repairs. Provide a credit at closing to cover the cost of repairs. Have the repairs completed by a licensed contractor before closing.4.

Walk Away (if necessary)

If the electrical issues are too extensive or the seller is unwilling to address them, be prepared to walk away from the deal. Your safety and financial well-being are paramount.

Important Considerations for Electricians Providing Quotes



Code Compliance

Make sure any proposed repairs or upgrades bring the electrical system up to current code.

Permitting

Ensure that the electrician pulls the necessary permits for the work. This ensures that the work is inspected by the local authority and meets safety standards.


Load Calculation:
Request a load calculation to determine the actual electrical demand of the home. This will help determine the appropriate size of the service entrance and panel.In conclusion, your frustration is understandable. Home inspections are a valuable tool, but they're not a substitute for a thorough assessment by a qualified electrician, especially when dealing with older homes or homes with questionable electrical work. Proceed with caution, get expert advice, and prioritize your safety! Flag for review

Previous Question Next Question