Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Box Bracket Preference

User: Alwayslearningelec, Location: NJ

Asked on: Tuesday, November 19, 2024 at 7:43 am EST
Answered on: Thursday, March 6, 2025 at 5:22 am EST

Question: Anyone have a preferecne of the type of bracket you use when mounting a 4" or 4-11/16" box to metal stud for receptacles?Thinking the C series in the second link.https://www.nvent.com/en-us/search?brand=CADDY#q=box bracket&t=Tab_All&f:mad:nvent_brand=[CADDY]

Okay, let's break down the options for mounting 4" and 4-11/16" boxes to metal studs, focusing on the CADDY options you linked, and discuss preferences.

Factors to Consider When Choosing a Bracket



Ease of Installation

How quickly and easily can you install the bracket? Is it a tool-free design, or does it require screws/rivets? Speed is a huge factor in commercial electrical work.


Security/Stability

How well does the bracket hold the box in place? Does it resist movement or vibration? A receptacle being wiggled loose can be a serious problem.

Adjustability

Can you adjust the box depth after installation to account for varying wall finishes? This is often crucial.


Code Compliance

Does it meet local and NEC (National Electrical Code) requirements? (e.g., support weight, proper grounding, etc. - check with your local authority).

Cost

Brackets vary in price. Consider the cost per bracket
multiplied by the number you'll be using. A slightly more expensive but much faster option can be cheaper in the long run due to labor savings.

Wire Management

Some brackets offer features to help manage the wires inside the box.

Analyzing the CADDY Options (based on your link)

While the search results page shows many options, based on your comment about "C series in the second link," I'll assume you're looking at something similar to these:

CADDY® CAT BAR Box Mounting Bracket

These brackets are often installed with a hammer (or a screw gun), and are fast, and easy.


CADDY® C Channel Strut Box Mounting Bracket

These brackets use strut, are are very adjustable.

General Preferences & Recommendations


For Speed & Ease of Installation (High Priority in Commercial Work)



Spring Steel Clip-On Brackets (Like CADDY® CAT BAR)

These are extremely popular because they require minimal tools (often none!), and are very fast to install. They clip onto the stud, and the box is then secured to the bracket.


Pros

Speed, ease of use, often lower cost.

Cons

May not be as adjustable after installation as other types. May require extra tools.2.

For Adjustability & Flexibility



Adjustable Depth Brackets

These often consist of a bracket that attaches to the stud, and then a sliding or adjustable piece that holds the box. This is useful if you don't know the exact wall finish thickness ahead of time.

Pros

High adjustability, accommodates varying wall depths.


Cons

Can be more expensive and slightly more time-consuming to install than clip-on brackets.3.

For Heavy-Duty Applications (less likely with just a receptacle)



Screw-On or Rivet-On Brackets

These provide a very secure connection, but require tools for installation. These are more common for heavier boxes or in situations where vibration is a concern.


Pros

Very secure, good for heavier boxes.

Cons

Slower installation, requires tools.

Specific Recommendations (with the caveat that I can't see
exactly the models you're considering without specific part numbers)



If Speed is paramount

A spring steel clip-on type bracket (similar to CADDY CAT BAR) is the way to go. The labor savings often outweigh a slightly higher per-bracket cost.

Important Considerations BEFORE Buying



Stud Gauge

Ensure the bracket is compatible with the gauge (thickness) of the metal studs you're using. Thinner studs require different clips than thicker studs.


Local Codes & Inspections

Confirm that the bracket you choose is approved for use in your area and meets all applicable electrical codes. Your electrical inspector is the final authority.

Box Type

Make sure the bracket is specifically designed to work with the 4" or 4-11/16" boxes you are using.


Grounding

Ensure the bracket provides a good grounding path for the box.

In summary:


For standard receptacle mounting to metal studs, a spring steel clip-on bracket is usually the best choice due to its speed and ease of installation. If adjustability is a major concern, look for a bracket that allows for depth adjustment after installation. Always prioritize code compliance and ensure the bracket is compatible with your studs and boxes. Flag for review

Previous Question Next Question