Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Arrow-Hart Murry Electrical panels Cat# LP012-PC Fire hazard

User: Jwayne5165, Location: Camarillo, CA

Asked on: Wednesday, November 20, 2024 at 2:08 pm EST
Answered on: Thursday, March 6, 2025 at 5:27 am EST

Question: Hello,I am trying to find out if the referenced electrical panel is a know fire hazard or possibly the circuit breaker's installed in them.I have approx. 100 of the in industrial condos and insurance is flagging them as unsafe.Any reference material would helpThank You

Okay, let's break down how to investigate this and find the information you need. This is a serious issue, and you need solid evidence to either refute the insurance company's claim or address the problem effectively.1. Identify the Exact Electrical Panel and Breaker Details



Manufacturer and Model Number

This is the single most important piece of information. Every electrical panel has a label (usually inside the door) that clearly states the manufacturer (e.g., Square D, Cutler-Hammer/Eaton, Siemens, GE, ITE/Siemens, Zinsco, Federal Pacific) and a specific model number.
Write these down for EVERY panel you're investigating. A photo of the label is even better.

Breaker Types

Note the manufacturer and type of breaker installed in the panel. Are they the original breakers specified for the panel? Are they the correct amperage rating for the circuits they protect? Are they all the same brand/type, or are there a mix of brands?

Panel Age (if known)

Sometimes, the age of the panel is relevant, particularly if it's a model that was manufactured during a specific period known for problems.


Physical Condition

Document the physical condition of the panels. Look for signs of: Rust Corrosion Overheating (discoloration, melted plastic, burning smells) Evidence of previous arcing or sparking Loose connections (visible or detectable by gently wiggling wires) Moisture intrusion Rodent damage

2. Research Potential Fire Hazards

This is where the manufacturer and model number are critical. Here's a breakdown of how to proceed:


Internet Search (Google, DuckDuckGo, etc.)

Start with targeted searches: `"[Manufacturer] [Model Number] fire hazard"` (e.g., "Federal Pacific Stab-Lok fire hazard") `"[Manufacturer] [Model Number] problems"` `"[Manufacturer] [Model Number] recall"` `"Electrical panel fire hazard"` `"Circuit breaker failure"` "[Breaker brand] failure"

Look for Common Problem Brands/Types



Federal Pacific Electric (FPE) Stab-Lok Panels

These are notorious for a high rate of failure. The breakers may fail to trip under overload or short circuit conditions, leading to overheating and fire. This is the most likely candidate for what your insurance company is worried about. There's a vast amount of information online about FPE panels and the associated dangers. Many insurance companies simply won't insure buildings with FPE panels.

Zinsco/GTE Sylvania Panels

Like FPE, Zinsco panels have a history of breaker failure, particularly breakers that become stuck on and fail to trip. These are also considered a significant fire hazard. The design of the Zinsco bus bar connection is a known weakness.


Challenger Electrical Equipment

These have also been known to have issues.

ITE/Siemens

Some older ITE panels have had reported issues, but these are generally less widespread than FPE or Zinsco. Still, research is essential.


Counterfeit Breakers

Be wary of generic or unbranded breakers that may be counterfeit and lack proper safety certifications. These are particularly common on online marketplaces.

Consult with Qualified Electrical Professionals



Licensed Electrical Contractor

This is the most important step. A qualified electrician can physically inspect the panels, assess their condition, and advise on the best course of action. Get multiple quotes and opinions. Explain to them the insurance company's concerns.

Electrical Engineer

In more complex cases or if you need a detailed analysis, consider consulting an electrical engineer. They can perform load calculations and assess the overall safety and suitability of the electrical system.


Contact the Manufacturer

If the manufacturer is still in business (e.g., Square D/Schneider Electric, Eaton/Cutler-Hammer, Siemens), you can contact their technical support department and inquire about any known issues or recalls related to the specific panel model.

3. Documentation and Reporting



Keep Detailed Records

Maintain a spreadsheet or database with the following information for each panel:
Location (e.g., Condo Unit #, Building #) Manufacturer Model Number Breaker Types Age (if known) Physical Condition Notes (with photos) Date of Inspection Name of Inspector (Electrician) Recommendations from Electrician

Provide Documentation to the Insurance Company

Present your findings to the insurance company in a clear and organized manner. This should include:
A summary of your investigation. Copies of the panel labels. Photos of the panels. Reports from the electrical contractor(s). Copies of any relevant technical bulletins or recall notices you found.

4. Addressing the Problem (if necessary)

If your investigation confirms that the panels or breakers are a fire hazard, you'll need to take corrective action. This may involve:

Panel Replacement

Replacing the entire panel with a modern, safe panel is often the best solution, especially for FPE and Zinsco panels.


Breaker Replacement

If the breakers are the only problem, replacing them with UL-listed, properly rated breakers may be sufficient. However, in the case of FPE and Zinsco, it's generally recommended to replace the entire panel.

Circuit Modifications

In some cases, you may need to modify the electrical circuits to reduce the load on the panel.


Regular Inspections

Implement a program of regular electrical inspections to identify and address potential problems early on.

Important Considerations



Code Compliance

Any electrical work must comply with the National Electrical Code (NEC) and local building codes.


Permits

In most jurisdictions, you'll need to obtain an electrical permit before performing any significant electrical work.

Safety First

Electrical work is dangerous. Always de-energize circuits before working on them, and follow all safety precautions. If you're not qualified, hire a licensed electrician.


Insurance Requirements

Work closely with your insurance company to understand their specific requirements and ensure that your corrective actions meet their standards. Getting their pre-approval for any work is highly recommended.*

Consult legal counsel.
An attorney can guide you through your options.

In summary, the key is to


Accurately identify the panels and breakers.
2. Thoroughly research potential hazards.3. Consult with qualified professionals.4. Document everything.5. Take appropriate corrective action based on the findings.

Good luck with your investigation. This is a critical safety issue, so it's important to address it thoroughly and responsibly. Flag for review

Previous Question Next Question