Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Siemens dual purpose breakers

User: Audubon94, Location: Buffalo, N.Y.

Asked on: Thursday, November 21, 2024 at 3:35 pm EST
Answered on: Thursday, March 6, 2025 at 5:31 am EST

Question: Is anyone else having issues with these breakers tripping with vacuums and Frigidare appliances? Or could it be because the electrician didn’t pigtail the outlets. Or perhaps poor electrical work?

Yes, it's definitely possible that you're experiencing tripped breakers due to vacuums and Frigidaire appliances. Here's a breakdown of potential causes, and how pigtailing and poor electrical work can contribute

Possible Causes of Tripping Breakers:
Overload

The most common cause. Vacuums, especially older or high-powered models, can draw a significant amount of current. Frigidaire appliances (refrigerators, stoves, dishwashers) also have substantial startup surges, particularly the compressor in a refrigerator. If the combined draw of these appliances and anything else on the same circuit exceeds the breaker's amperage rating (typically 15A or 20A), the breaker will trip to prevent overheating and potential fire.


Short Circuit

A short circuit occurs when there's an unintended path for electricity to flow, bypassing the normal load. This can be caused by damaged wiring, loose connections, or a faulty appliance. Short circuits usually cause immediate and forceful tripping.

Ground Fault

A ground fault happens when electricity escapes the intended circuit and flows to ground (often through the metal casing of an appliance or through a person touching a faulty appliance). Ground Fault Circuit Interrupters (GFCIs) are designed to detect these faults and trip very quickly, protecting against electrocution.


Arc Fault

An arc fault is a dangerous condition where electricity jumps between conductors, creating heat and potentially igniting nearby materials. Arc Fault Circuit Interrupters (AFCIs) are designed to detect these arcs and trip to prevent fires. These are common in newer homes.

Faulty Breaker

Although less common, breakers can weaken over time and trip at lower-than-rated amperages.

How Pigtailing and Poor Electrical Work Can Contribute



No Pigtailing (or Poorly Done Pigtailing)

What it is: Pigtailing involves connecting multiple wires to a single terminal using a short piece of wire (the "pigtail") and a wire connector (like a wire nut). This creates a more secure and reliable connection than simply jamming multiple wires under a single screw terminal. How it can cause problems:



Loose Connections

Without pigtailing, wires held under a single screw can loosen over time due to vibration, temperature changes, or simply being disturbed. Loose connections increase resistance, causing heat buildup. This can lead to:


Overheating

The increased resistance generates heat, which can damage the outlet, wiring, and potentially start a fire. This added heat can also cause the breaker to trip at lower-than-expected loads.

Intermittent Power

The loose connection can cause flickering lights or intermittent power, which can stress appliances and contribute to breaker tripping.


Reduced Current Carrying Capacity

Cramming multiple wires under a single screw can reduce the effective current-carrying capacity of the connection, making it more prone to overload.

Poor Electrical Work in General



Undersized Wiring

If the wiring used for the circuit is too thin (too high a gauge) for the intended load, it can overheat and cause the breaker to trip. This is a serious safety hazard.

Loose Connections Elsewhere

Loose connections at other points in the circuit (in the breaker panel, junction boxes, or other outlets) can have the same effects as loose connections at the outlet.


Damaged Wiring

Nicked, frayed, or poorly insulated wires can create short circuits or ground faults.

Improperly Installed Outlets

Outlets that are not properly secured can move, stressing the connections and potentially causing them to loosen.

Troubleshooting Steps


Identify the Circuit

Determine which breaker controls the outlets you're using for the vacuum and Frigidaire appliances.2.

Check the Breaker

Make sure the breaker is fully switched "off" and then firmly switched back "on." Sometimes, a breaker can appear to be on but not be fully engaged.3.

Reduce the Load

Unplug other appliances on the same circuit. Try running the vacuum and the Frigidaire appliance (one at a time) to see if the breaker still trips. If the breaker doesn't trip with only one appliance running, it's a strong indication of an overload.4.

Check the Appliance Ratings

Look for the wattage or amperage rating on the vacuum and Frigidaire appliance. Add up the ratings of everything on the circuit. If the total is close to or exceeds the breaker's rating, you're likely overloading the circuit.5.

Inspect the Outlets (Carefully!)



Turn off the breaker before doing any visual inspection of the outlets. Look for signs of discoloration, burning, or melting. Gently wiggle the outlet. If it feels loose, that's a concern.

Do NOT attempt to repair any electrical wiring yourself unless you are a qualified electrician.6.

Test with a Different Outlet (on a Different Circuit)

Plug the vacuum and Frigidaire appliance into a different outlet that you know is on a different circuit. If they work fine on another circuit, the problem is likely with the original circuit.7.

Consider a Dedicated Circuit

If you frequently use high-power appliances like vacuums, consider having an electrician install a dedicated 20-amp circuit specifically for those appliances.

When to Call an Electrician



Any time you are uncomfortable working with electricity. If you suspect any loose wiring, damaged wiring, or burning smells. If the breaker continues to trip even after you've reduced the load. If you're not comfortable inspecting the outlets yourself. If you suspect undersized wiring. If you have aluminum wiring (common in older homes). Aluminum wiring requires special handling.

Regarding Pigtailing

It's generally a good practice for electricians to pigtail outlets, especially in situations where multiple wires need to be connected. While the
absence of pigtailing might not be the sole cause of your problem, it can certainly contribute to loose connections and increase the risk of overheating.

In conclusion

While it's impossible to say for sure without a thorough inspection, the combination of vacuums and Frigidaire appliances, along with potential issues like the absence of pigtailing or poor electrical work, could definitely be contributing to your breaker tripping problem.

It's highly recommended to consult with a qualified electrician to diagnose the problem and make the necessary repairs.
* Safety is paramount when dealing with electricity. Flag for review

Previous Question Next Question