User: steelandfeels, Location: California
Asked on: Sunday, November 24, 2024 at 11:35 am EST
Answered on: Thursday, March 6, 2025 at 5:37 am EST
Question: Hey all,I currently have a Q Cell Hyb G1 inverter with 19kwh of storage.There are two power outputs for the inverter.1. Grid tied2. Backup load.The installation requires backup loads be sent to a dedicated breaker panel to power all of your deemed essential loads.I have deemed ALL of my loads essential and need to transfer backup power to existing sub panel during outages.My research has brought me to finding a "Smart" ATS that does not rely on a controller in the generator to switch over. This should be a 2 wire start system.What brands/ models would work with this 100 amp application?Trying to get this done for under $1000.
Okay, let's break down your requirements and find some Automatic Transfer Switch (ATS) options that might fit the bill. You're looking for a 100A ATS compatible with your Q Cell Hyb G1 inverter, designed for whole-house backup (or at least, backing up a substantial sub-panel), using a 2-wire start/signal, and at a budget of under $1000. That's a challenging but not impossible goal.
Understanding Your Needs and Challenges
100A Capacity
This is a substantial load, which increases the cost. Lower amperage ATS units are significantly cheaper.
2-Wire Start/Signal
You need an ATS that triggers the inverter's backup output based on a simple two-wire signal (usually a dry contact closure indicating grid failure). This is important because you're bypassing any communication the inverter might have with a specific generator controller.
"Smart" Feature (Grid Sensing)
You want an ATS that automatically detects the loss of grid power and initiates the transfer to the inverter's backup load output. This is the sine qua non of an ATS's smarts.
Budget of $1000
This is the biggest hurdle, especially at 100A. ATS units in this amperage range often exceed this price point.
Why Your Current Situation Requires an ATS
Your Q Cell inverter has a dedicated backup load output. This is perfect, provided you can automatically switch your existing sub-panel to that output when the grid fails. An ATS does exactly that: it continuously monitors the grid. When it detects a power outage, it automatically disconnects your sub-panel from the grid and connects it to your inverter's backup output. When grid power returns, it switches back to the grid.
ATS Options to Consider (Keeping Budget in Mind)
Given the tight budget, focusing on reputable brands and well-reviewed models is critical. You might need to be flexible and open to slightly used or open-box units from reputable sources (like Amazon Warehouse Deals or similar) if you're sticking strictly to $1000. Always verify the seller's reputation and the return policy before buying used electrical equipment.Here are some potential options, keeping in mind that pricing can fluctuate significantly:1.
Reliance Controls Corporation
Reliance Controls is a well-known manufacturer of transfer switches. They are a more affordable option.
Potential Models
Look at the
Reliance Controls 31410CRK 100-Amp It has many positive reviews and falls within your budget. Pros
Generally more affordable, reliable, simple to install, and a standard in the industry.
Cons
Fewer advanced features than some of the more expensive ATS units.2.
Generac/Centric
Generac is a major player in the generator and transfer switch market.
Potential Models
Centric is a rebrand of generac. Look at Centric ATS100 100 Amp
Pros
A well-known brand, good reputation, and a range of models.
Cons
Can be more expensive than some other brands.3.
Asco
Asco is more commercial-grade, they may not fit into your budget but I added it for awareness.
Pros
Commercial grade
Cons
Expensive
Key Considerations When Choosing and Installing
Local Electrical Codes
Crucially, comply with all local electrical codes and regulations. An incorrectly installed ATS can be dangerous and violate regulations. In most jurisdictions, installation MUST be performed by a licensed electrician.
Professional Installation
Highly recommended (and often required). A qualified electrician will ensure the ATS is properly sized, wired, grounded, and integrated with your existing electrical system.
2-Wire Start Compatibility
Double-check the ATS specifications to ensure it's compatible with a simple 2-wire start/signal for your inverter's backup output. The electrician can confirm this.
Sizing
Make sure the ATS is rated for at least the maximum amperage of the sub-panel you intend to back up. A 100A ATS is typically a good choice for a 100A sub-panel.
Neutral Bonding
Pay close attention to neutral bonding requirements. Depending on your specific setup and local codes, the neutral may need to be switched by the ATS or kept bonded. Your electrician will handle this!
Testing
After installation, thoroughly test the ATS to ensure it switches over correctly when the grid is simulated to fail (e.g., by turning off the main breaker).
Where to Buy
Electrical Supply Houses
These are often the best source for ATS units, as they can offer technical advice and competitive pricing.
Amazon and Other Online Retailers
Be cautious and ensure you're buying from a reputable seller. Read reviews carefully.
Home Improvement Stores (Lowe's, Home Depot)
They may carry a limited selection of ATS units, often from Reliance Controls.
Important Safety Note:Working with electricity can be dangerous. If you are not a qualified electrician, do not attempt to install an ATS yourself. Hire a licensed electrician to ensure the installation is done safely and correctly.Let me know if you have more questions. Flag for review