User: Tulsa Electrician, Location: Tulsa
Asked on: Monday, November 25, 2024 at 6:48 pm EST
Answered on: Thursday, March 6, 2025 at 5:39 am EST
Question: Been reading on 240.24.(d).Found this article and was trying to find the NFPA paper on it.Any help would be appreciated.https://www.ecmag.com/magazine/articles/article-detail/codes-standards-safely-installing-electrical-and-service-panels-residential-closets
Okay, I understand. You're reading about installing electrical panels in residential closets and the EC&M article referenced 240.24(D) of the NEC (National Electrical Code) regarding clearances around overcurrent devices. You're now looking for the specific wording in the NFPA document itself.Here's how to find that:1. Identify the Relevant Edition of the NEC
The EC&M article doesn't specify which edition of the NEC they're referencing. You'll need to figure out which edition is currently being enforced in your jurisdiction. NEC codes are updated on a 3 year cycle.2.
Access the NEC (NFPA 70)
The National Electrical Code is published by the National Fire Protection Association (NFPA) as NFPA 70.3.
Navigate to Article 240: Overcurrent Protection4. Locate Section 240.24: Location in or on Premises5. Find Subsection 240.24(D)
This section specifically covers the clearances around overcurrent devices.6.
Clearance RequirementsWhat 240.24(D) Generally Says (but verify with your edition!)
Without knowing the specific year of the NEC you are referencing, I can't give you the exact wording, but a typical summary of 240.24(D) includes:
Working Space
Overcurrent devices must have sufficient working space to permit safe operation and maintenance. This typically refers to the space in front of the panel.
Dedicated Electrical Space
The space above and below the panel must be dedicated to electrical equipment. This is to prevent other systems (e.g., plumbing, ductwork) from encroaching on the electrical panel, making access difficult and potentially creating hazards.
Illumination
Sufficient illumination must be provided for working on the overcurrent devices.
Headroom
Adequate headroom is required around the panel.
Important Considerations
Local Amendments
Be aware that local jurisdictions may amend the NEC. Always check with your local building department or electrical inspector to confirm which edition of the NEC is in effect and if there are any local changes.
Manufacturer's Instructions
Always follow the panel manufacturer's installation instructions, which may provide additional requirements or clarifications.*
Closet Space: The fact that you're dealing with a closet highlights the importance of proper clearances. A cluttered closet can easily obstruct access to the panel, violating the code.If you can tell me the edition of the NEC you are using, I can provide a more detailed response. Flag for review