User: bellington, Location: Hahira, GA
Asked on: Monday, November 25, 2024 at 8:51 pm EST
Answered on: Thursday, March 6, 2025 at 5:40 am EST
Question: Can someone tell me what this material is? It is 10mm thick, and 60mm wide. It is the ground bus bar on a switch gear. I assume it is copper with some coating. I need a piece to bridge a gap we had to create between cabinets. It needs to be 20-3/4" long, with a hole on each end with 18-1/4" center to center. Bolt holes need to be 11mm elongated to 13mm lengthwise. Does anyone know of a supplier for metric bus ground bar?
Okay, let's break this down and figure out the best solution for your bus bar bridge.
Understanding the Material
Based on your description, it's almost certainly
tin-plated copper. Here's why: Copper
Bus bars are almost universally made from copper due to its excellent conductivity.
Coating (likely tin)
Copper corrodes over time, especially in environments with humidity or certain chemicals. Tin plating is a common surface treatment for bus bars to prevent corrosion and ensure a reliable electrical connection. Tin also enhances solderability if needed. It would be unusual to use other coatings like paint or powder coating on a bus bar as it is a conductive surface.
Sourcing a Replacement/Bridge Section
You have a few options for getting your 20-3/4" (approximately 527mm) bridge piece:1.
Direct Replacement from the Switchgear Manufacturer
This is often the best option. Contact the manufacturer of your switchgear (or their authorized distributor). They can provide a properly rated, dimensionally accurate replacement bus bar section. This ensures compatibility and maintains the integrity of the grounding system. You may need to provide the part number, model number, and serial number of the switchgear.
Pros
Guaranteed compatibility, proper materials and ratings, potentially pre-drilled.
Cons
Might be the most expensive option, could have a longer lead time.2.
Electrical Supply House (Specialty)
Some larger electrical supply houses specialize in industrial components like switchgear parts and bus bars. They may be able to source a standard bus bar section that meets your dimensions or offer custom fabrication.
Pros
Potentially faster than the manufacturer, knowledgeable staff.
Cons
May not be a perfect dimensional match, you'll need to specify all details accurately.3.
Online Suppliers (Specialty)
Several online retailers focus on electrical components, including bus bars. Search for terms like "metric bus bar," "ground bus bar," "tin-plated copper bus bar," and specify your dimensions. Look for suppliers that cater to industrial electrical needs. Some can even provide custom cutting and drilling.
Pros
Wide selection, often competitive pricing, online ordering convenience.
Cons
Verify the supplier's reputation and product specifications carefully. Double-check dimensions and hole placements before ordering.4.
Metal Fabrication Shop
If you can't find a pre-made solution, a metal fabrication shop can custom-make a bus bar to your exact specifications. You'll need to provide them with a detailed drawing, including material type (tin-plated copper), dimensions (length, width, thickness), hole size, and hole spacing.
Pros
Precise customization.
Cons
May be more expensive and time-consuming.
Important Considerations and Specifications
Material
Absolutely critical. Stick with tin-plated copper to match the existing bus bar. Using a different metal will create a galvanic corrosion risk.
Current Carrying Capacity
This is a critical safety factor. You need to ensure the replacement bus bar is rated to carry the expected fault current (short circuit current) for your system. The switchgear manufacturer's documentation will provide this information. Using an undersized bus bar can lead to overheating, melting, and a catastrophic failure during a fault.
Dimensions
10mm x 60mm x 527mm (approximately). Accuracy is important for a good fit.
Hole Size and Spacing
11mm elongated to 13mm lengthwise, 18-1/4" (463.5mm) center-to-center. Ensure the holes are properly aligned and de-burred.
Hole Placement
Precision is critical for a good fit.
Tin Plating
Ensure the replacement bus bar is tin-plated for corrosion resistance.
Standards Compliance
If your application has specific standards requirements (e.g., UL, IEC), verify that the replacement bus bar meets those standards.
Example Search Terms for Online Suppliers
"Tin plated copper bus bar 10mm x 60mm" "Metric grounding bus bar" "Custom bus bar fabrication"
Before Ordering or Fabricating
Consult the Switchgear Manufacturer's Documentation
This is your best source for confirming the exact specifications and ratings of the original bus bar.2.
Double-Check Measurements
Measure the existing bus bar carefully to ensure accuracy.3.
Provide Clear Specifications
When requesting a quote or ordering, provide the supplier with a detailed drawing, including all dimensions, material specifications, hole sizes, and hole spacing.4.
Ask About Certifications
Ask the supplier if the bus bar meets any relevant industry standards (e.g., UL, IEC).5.
Verify Current Rating
Make absolutely sure the new bus bar has at least the same current carrying capacity as the original.
Safety Note:
Working with electrical equipment can be dangerous. If you are not a qualified electrician, consult with a professional. Always de-energize the equipment and follow proper safety procedures before working on any electrical connections. Flag for review