User: LarryFine, Location: Henrico County, VA
Asked on: Tuesday, November 26, 2024 at 10:56 pm EST
Answered on: Thursday, March 6, 2025 at 5:42 am EST
Question: I'm having a debate discussion in a motorcycle forum about the current of starter motors with varying battery voltage.My position is that the torque output is proportionate to electrical power input, just like with 1ph and 3ph AC motors.The "prosecution" says that DC motors, especially permanent-magnet motors, do not behave the same way as AC's.As an aside, I thought starter motors were series-wound. I don't know whether that has any effect on the discussion.So, my question is whether DC motors use more current with a lower voltage? "Does the defense's case hold water?"
Okay, let's break down the arguments about DC starter motors and how they behave with varying voltage, and see if the "defense's" case holds water. You're essentially asking if a lower voltage necessarily means a higher current draw for the same torque output in a DC starter motor.
Your Position (Torque Proportional to Electrical Power Input)
Your core idea is generally correct. Torque in a motor is related to electrical power input. If you need a specific amount of torque to turn the engine over, you need a certain amount of power going into the starter motor. Power (P) is Voltage (V) Current (I). Therefore, if Voltage drops, Current needs to increase to maintain the same Power level.
The "Prosecution's" Argument (DC Motors Behave Differently Than AC)
They are partially correct, but also missing the crucial point that all motors must consume a specific power for a specific amount of torque and speed
Permanent Magnet DC Motors
These motors have a fixed magnetic field strength provided by the permanent magnets.
Series-Wound DC Motors (Starter Motors)
These motors have the field winding connected in series with the armature winding. This is a critical distinction. The field strength varies with the armature current.
Why Series-Wound Matters for Starter Motors
High Starting Torque
Series-wound motors are specifically chosen for starter motor applications precisely because they provide very high torque at low speeds (when starting a cold engine). They achieve this because at low speeds, the current is high, which strengthens the magnetic field, which in turn increases torque even more.2.
Non-Linear Relationship
The relationship between current, voltage, torque, and speed in a series-wound motor is highly non-linear. This is very different from many AC motors. The field strength is directly proportional to the armature current, so the torque increases with the square of the current.3.
Danger of Runaway
A series-wound motor, if not under load, can theoretically accelerate to very high speeds because the weakening field requires very little current to maintain speed, but this is not an issue for starter motors as they are always under considerable load when the motor turns over.
Answering Your Key Question: Does a DC Motor Use More Current With Lower Voltage? Generally YES, to maintain the same torque output. This is the fundamental relationship P=VI. If you reduce the voltage while needing the same power (to produce the same torque), the current must increase.
Does the "Defense's" Case Hold Water? Partially. They are correct that DC motors, especially series-wound ones, don't behave in a linearly proportional manner like some AC motors. The relationship is more complex due to the interaction between current, magnetic field strength, and torque. However, they are incorrect to say that the basic principle of power = voltage current doesn't apply. If the starter motor needs to provide a certain torque to crank the engine, it must draw a certain amount of power. If the voltage is lower (e.g., due to a weak battery), it will draw a higher current to compensate. Importantly
A weak battery not only provides lower voltage, but also has a higher internal resistance. This further limits the current it can deliver, compounding the problem. So, even though the starter motor tries to draw more current, the weak battery might not be able to supply it.
In summary
You are fundamentally correct: To produce a given torque, a motor needs a given power. If voltage drops, current must increase. The defense has a partial point about the non-linear behavior of DC, series-wound motors. The real-world impact of a weak battery is that it drops voltage and cannot supply the higher current the starter motor demands, resulting in weak or no cranking.
Crucially, a lower voltage will result in a higher current draw if the motor is still able to produce the required torque (even at a lower speed), but a weak battery might not be capable of supplying that current.How to Argue in the Forum:1. Acknowledge the non-linear behavior of series-wound DC motors, but emphasize that this doesn't invalidate the fundamental relationship between power, voltage, and current.
2. Explain that to achieve the same torque at a lower voltage, the current must increase.3. Highlight the practical limitation of a weak battery: it can't supply the increased current needed to compensate for the voltage drop, resulting in reduced torque and cranking speed.
4. You can also point out that even though torque may theoretically increase as voltage drops because current increases, the motor will likely stall at a lower voltage before this condition is met. In reality, at the minimum voltage required to start the engine, the amperage will only increase so much as to not melt the windings, and it will likely still fail to produce enough torque to start the engine.Good luck in your debate! Flag for review