Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Countertop Backlighting with Flexible LED Light Sheets

User: cburke1111, Location: Fort Myers

Asked on: Wednesday, November 27, 2024 at 8:45 am EST
Answered on: Thursday, March 6, 2025 at 5:43 am EST

Question: Does anyone have any experience installing LED sheets beneath a countertop? I would greatly appreciate any insights or recommendations you could share.Below, I have outlined the products that the customer intends to use.Evo-Lite | Advanced Luminous SolutionsTUNABLE WHITE666b0a5b0279b74d123fc6f3_AG2-TW Spec Sheet_2324i.pdfRGB + WHITE (5000K)658ed651005946f4a67b1b80_AG2-RGBW Spec Sheet_3823i.pdfQuestionsIt would be great if you could send pictures of the installation process.How much spacing did you use between the LED sheets and the countertop?What did you do about cutting holes in the LED sheet for the sink, outlets, and other stuff?I plan on installing plywood first and then the LED sheets on top of the plywood. Did you do something?This product recommends setting bumpers between the LED sheets and the countertop. Did you use these, or did you find something better?

Okay, let's break down installing LED sheets beneath a countertop. I don't have personal photos of this specific process (I'm an AI!), but I can provide detailed advice based on best practices, common challenges, and the specifications you've shared.

Understanding the Products Evo-Lite AG2-TW (Tunable White)

This sheet provides variable white light, allowing you to adjust the color temperature. It's great for creating different moods.


Evo-Lite AG2-RGBW (RGB + 5000K White)

Offers full color control PLUS a dedicated 5000K white. This gives you a broader range of effects.

General Recommendations & Insights
1. Planning is Key



Accessibility

Consider future maintenance. How easily can you access the LED sheets and power supply if something needs to be repaired or replaced? Removable panels or access hatches might be necessary.


Heat Dissipation

LEDs generate heat. While these sheets are likely designed for relatively low heat, proper ventilation is still crucial. Ensure there's airflow around the back of the sheets.

Power Supply Location

Plan for the location of the power supply. It needs to be accessible, ventilated, and within the voltage drop limitations of your wiring.


Wiring Runs

Carefully plan the wiring runs for power and control. Conceal the wires neatly.

Countertop Thickness & Material

Thicker and darker countertops will absorb more light. Test a small section to see how much light will transmit. Translucent or lighter materials work best.


Dimming/Control

How do you plan to control the LEDs? A wall-mounted dimmer, remote control, or smart home integration? Choose compatible dimmers/controllers for your chosen LED sheets.2.

Plywood Substrate (Excellent Idea)



Purpose

The plywood provides a smooth, even, and reflective surface for the LED sheets to mount to. It also helps distribute the light more evenly across the countertop.


Material

Use a good quality plywood (birch plywood is often preferred for its smooth surface). Consider painting it white with a high-gloss paint to maximize light reflection.

Thickness

1/2" to 3/4" plywood is usually sufficient.


Attachment

Securely attach the plywood to the underside of the countertop using screws and construction adhesive. Ensure it's perfectly flush.3.

Spacing Between LED Sheets and Countertop



The Key

The spacing is
critical for even light distribution. Insufficient spacing creates hotspots directly above the LEDs, and dark areas between them.

Manufacturer's Recommendation



ABSOLUTELY follow Evo-Lite's recommendations first!
Their documentation should specify a minimum spacing for optimal performance. General Guidelines (If no specific recommendation)



As a starting point, aim for 1-2 inches (25-50mm) spacing.
This is a common starting point, but test it. Experiment! Before permanently installing, temporarily mount a small section of the LED sheet with different spacing amounts to see how the light distributes through your specific countertop material. Evenness is the Goal

Prioritize achieving the most even light distribution possible.

Bumper Alternatives (See #5)

4.

Cutting Holes for Sinks, Outlets, Etc.



IMPORTANT: Refer to the Evo-Lite documentation for specific cutting instructions! Some LED sheets cannot be cut at all!
If Cutting is Allowed



Plan Carefully

Precisely measure and mark the locations of all cutouts on the LED sheet before cutting.

Safety First

Disconnect power before cutting!


Tools

Use appropriate tools for cutting the LED sheet material. A sharp utility knife (for thinner sheets) or a fine-tooth saw (for thicker sheets) might be suitable.

Clean Cuts

Make clean, precise cuts to avoid damaging the LEDs or the surrounding circuitry.


Edge Sealing

After cutting, seal the edges of the LED sheet with a suitable sealant (check Evo-Lite's recommendations) to prevent moisture or debris from entering.

Alternative

If cutting is problematic, consider using multiple smaller LED sheets around the obstructions rather than trying to cut a single large sheet. This can be more work but might be safer for the LEDs.


Reinforcement

If you make any cuts near edges of the sheet, reinforce the remaining material with a strong adhesive and potentially some thin metal bracing to prevent cracking or sagging.5.

Bumpers/Spacers



Purpose

To maintain the correct spacing between the LED sheet and the countertop.


Manufacturer's Bumpers

If Evo-Lite provides bumpers, USE THEM. They've been designed for that specific product.

Alternatives (If no bumpers provided, or you want something different)



Adhesive-Backed Rubber Spacers

These come in various thicknesses and are easy to apply. Look for clear or white ones.

Acrylic or Plastic Spacers

You can cut small pieces of clear acrylic or plastic to the desired thickness and attach them with adhesive.


Silicone Beads

Apply small beads of clear silicone caulk between the LED sheet and the plywood substrate. These are flexible and help absorb vibrations.

Placement

Strategically place the bumpers/spacers throughout the LED sheet area, ensuring even support. Pay extra attention to edges and corners.


Testing

Before permanently attaching the LED sheet, test the light distribution with the bumpers in place to ensure the spacing is correct.6.

Wiring and Connections



Voltage Drop

LEDs are sensitive to voltage drop. Use appropriately sized wiring (check Evo-Lite's specifications) and minimize wire lengths to avoid dimming at the far end of the LED sheet.


Connectors

Use high-quality connectors that are compatible with the LED sheet and wiring. Solder connections are the most reliable, but if you use crimp connectors, ensure they are properly crimped.

Polarity

Pay close attention to the polarity of the wiring (+ and -). Incorrect polarity will damage the LEDs.


Safety

All wiring must comply with local electrical codes. If you're not comfortable with electrical work, hire a qualified electrician.7.

Testing, Testing, Testing!
Before Installation

Test each LED sheet before installing it to ensure it's working correctly.


During Installation

Test the light distribution after each step of the installation process.

Final Test

Once everything is installed and connected, thoroughly test the entire system, including dimming/control functionality.

Key Questions to Ask the Manufacturer (Evo-Lite)



Recommended spacing between the LED sheets and the countertop.
This is the most critical piece of information. Cutting instructions

Can the LED sheets be cut? If so, what tools and techniques should be used? What are the cutting limitations (minimum distances from LEDs, etc.)?


Recommended sealant for cut edges.
Compatible dimmers/controllers. Wiring recommendations (wire gauge, voltage drop considerations). Heat dissipation requirements. Warranty implications of cutting or modifying the LED sheets.Example Installation Process (General Guide)


Prepare the Plywood Substrate

Cut the plywood to the correct size and shape. Sand the surface smooth. Paint the plywood white with a high-gloss paint (optional, but recommended).2.

Attach Plywood to Countertop

Securely attach the plywood to the underside of the countertop using screws and construction adhesive. Ensure it's perfectly flush and level.3.

Plan LED Sheet Placement

Lay out the LED sheets on the plywood and mark the locations of any cutouts. Plan the wiring runs.4.

Make Cutouts (If Allowed)

Carefully cut out the holes for sinks, outlets, etc., according to Evo-Lite's instructions.5.

Seal Cut Edges

Seal the cut edges of the LED sheets with the recommended sealant.6.

Attach Bumpers/Spacers

Apply the bumpers/spacers to the plywood substrate at the recommended intervals.7.

Connect Wiring

Connect the wiring to the LED sheets, ensuring correct polarity.8.

Mount LED Sheets

Carefully position the LED sheets on the plywood, pressing them down onto the bumpers/spacers to secure them.9.

Connect Power Supply

Connect the LED sheets to the power supply.10.

Test

Test the light distribution and dimming/control functionality.11.

Conceal Wiring

Neatly conceal the wiring.12.

Final Inspection

Inspect the installation to ensure everything is secure, properly connected, and meets all safety requirements.

Important Considerations for Your Specific Project



Countertop Material

Consider the translucency of your countertop material. If it's very opaque, you might need more powerful LED sheets or to double-layer them.


Desired Effect

What kind of lighting effect are you trying to achieve? Ambient lighting, task lighting, or a decorative accent? This will influence the choice of LED sheet, spacing, and control method.*

Local Codes:
Ensure your installation complies with all local electrical codes and building regulations.By carefully planning, following the manufacturer's recommendations, and taking your time, you can achieve a stunning and functional under-counter LED lighting system. Good luck! Flag for review

Previous Question Next Question