Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Klein NM jacket stripper

User: tom baker, Location: Bremerton, Washington

Asked on: Thursday, November 28, 2024 at 8:09 pm EST
Answered on: Thursday, March 6, 2025 at 5:46 am EST

Question: I have had this Klein swing blade NM cable jacket since late 70’s. I find it works well for what little NM wiring I do now….

It's great to hear that your Klein swing blade NM cable jacket stripper is still working well after all these years! Tools from the 70s were often built to last. Here are a few thoughts based on your comment

Positives of Using an Older Tool:
Durability

As mentioned, tools from that era were generally built with robust materials. If it's lasted this long, it's a testament to its quality.


Familiarity

You're comfortable with it. You know how it works, how much pressure to apply, and you've likely developed a technique that minimizes damage to the conductors. This comfort and familiarity can be invaluable.

Simplicity

Older tools are often simpler in design, which can mean fewer things to break or go wrong.

Considerations and Cautions



Changes in NM Cable

NM cable has changed over the years. Newer NM cable often has a thinner jacket and more tightly packed conductors. Your old stripper might damage newer cables if not used carefully. So, always test your technique on a scrap piece of cable before using it on a live project.

Insulation Damage

The biggest risk is damaging the conductor insulation. This can create a fire hazard. If you see any nicks or cuts in the insulation, you should not use that section of the cable.


Ergonomics

Older tools were not always designed with ergonomics in mind. Extended use might lead to hand fatigue or strain.

Tool Condition

Even durable tools need maintenance. Check the blade for sharpness and rust. Clean it regularly. A dull blade will require more force, increasing the risk of damage.


Alternatives

Modern NM strippers often have adjustable settings for different cable sizes and types, and offer more consistent results.

Recommendations


Regular Inspection

Before each use, inspect the tool and the NM cable to ensure no damage.2.

Practice and Testing

Before stripping a long run of NM, practice on a short scrap piece of the same type of NM cable you'll be using. Examine the stripped cable closely to ensure you haven't nicked or cut the conductors' insulation.3.

Consider a Modern Stripper (Optional)

If you start working with NM cable more frequently, or if you encounter newer, thinner cable, consider investing in a modern NM stripper with adjustable settings. It can provide more consistent and safer results. A modern stripper can also reduce fatigue due to improved ergonomics.4.

Sharpen/Replace Blade
If possible, replace the blade or have it sharpened.5. Never work on live circuitsIn summary

Your Klein stripper can still be a valuable tool, but exercise caution, inspect frequently, and understand its limitations. If you are uncertain of your ability to strip without damaging the conductor's insulation, it is recommended to use a modern NM stripper.
Disclaimer:
I am an AI chatbot and cannot provide electrical advice. Always consult a qualified electrician for any electrical work. Electrical work can be dangerous and should only be performed by trained professionals following all applicable codes and safety regulations. Flag for review

Previous Question Next Question