Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Temperature adjustments

User: electrofelon, Location: Cherry Valley NY, Seattle, WA

Asked on: Friday, November 29, 2024 at 7:22 pm EST
Answered on: Thursday, March 6, 2025 at 5:47 am EST

Question: I had a more specific question about this in the PV forum, but I have been thinking about it and wanted to discuss this more generally and see what everyone's thoughts and experience has been on this. How often do you do temp corrections for conductors? Ill be honest and say I dont recall ever doing a temp adjustment for an actual installation, and have never really seen or heard of anyone else doing them either. What about attics? Shouldnt we do them there? I am in the northeast, what about down south where it is hotter?IT can go the other way too. What about correcting an underground installation to get more ampacity? Anyone do that?

Okay, let's break down temperature corrections for conductor ampacity, a topic often overlooked in the field but crucial for safe and compliant installations. You're right, many electricians don't routinely perform these calculations, but understanding when and why they're necessary is important.

The Basics: Ampacity and Temperature Ampacity

The current a conductor can carry continuously under specific conditions without exceeding its temperature rating. NEC 310.15 forms the foundation.


Temperature Rating

Every conductor is rated for a maximum operating temperature (e.g., 60°C, 75°C, 90°C). This rating is critical. Exceeding it can degrade insulation, leading to shorts, ground faults, and fires.

Ambient Temperature

The temperature of the environment surrounding the conductor. Higher ambient temperatures reduce a conductor's ability to dissipate heat.

When Temperature Corrections are REQUIRED (according to the NEC)



Ambient Temperatures Above 30°C (86°F)

This is the baseline in the NEC. If the ambient temperature exceeds 30°C, you must apply a correction factor to the ampacity rating. This is found in NEC Table 310.15(B)(1).

Attics

Yes, attics are a prime example of where temperature corrections are almost always necessary. Attic temperatures, particularly in warmer climates and during summer months, routinely soar well above 30°C (86°F). NEC 310.15(B)(3)(c) has specific rules for ambient temperatures in attics.


Direct Burial

Direct burial installations can have soil temps above 30C.

Other Hot Environments

Consider situations like:
Conductors near heat-generating equipment (ovens, furnaces, etc.) Conductors in poorly ventilated areas. Conductors exposed to direct sunlight. Conductors in hot industrial environments.

Bundled Conductors

NEC Table 310.15(B)(3)(a) dictates derating for more than 3 current-carrying conductors in a raceway, cable, or earth.

Why the Disconnect Between Theory and Practice?


You're not alone in observing that temperature corrections are often overlooked. Several factors contribute to this: Complacency

"We've always done it this way..." Old habits die hard, even if they're not the safest.


Oversizing

Intentionally upsizing conductors to account for potential temperature increases, without explicitly calculating the correction factor. This can be wasteful and isn't necessarily a guaranteed solution.

Lack of Awareness

Some electricians may not fully understand the NEC requirements or the consequences of exceeding conductor temperature ratings.


Difficulty in Measuring Ambient Temperature

Accurately measuring ambient temperature in the actual installation environment can be challenging.

Regional Differences (Northeast vs. South)
Northeast

While ambient temperatures in the Northeast are generally lower than in the South, attics can still get very hot in the summer. Temperature corrections in attics are still warranted in this region.


South

In the Southern US, temperature corrections are far more critical due to the consistently high ambient temperatures. Neglecting these corrections can significantly reduce the lifespan of conductors and increase the risk of electrical failures.

Temperature Adjustments for Increased Ampacity (Going the Other Way)


Yes, you can sometimes adjust ampacity upward if the ambient temperature is below 30°C (86°F). The NEC Tables provide adjustment factors for lower temperatures as well. This is far less common in practice, but here are the reasons why you would want to: Cold Environments

In some industrial applications or data centers, ambient temperatures might be consistently low.


Underground Installations

In certain areas with very cold soil temperatures, you might be able to increase the ampacity of underground conductors (use extreme caution and verify soil conditions and applicable codes).

Important Considerations



Accurate Ambient Temperature Measurement

Use a reliable thermometer or temperature sensor to determine the actual ambient temperature in the installation environment. This is critical for accurate calculations. You need to use the expected sustained ambient temp, not what it is on install day.


Conductor Termination Ratings

The weakest link in the chain. Many breakers and devices are only rated for 75°C conductors even if you use 90°C wire. You can't exceed the termination rating (NEC 110.14(C)). This often limits you, even if you derate the wire properly.

Safety First

When in doubt, oversize conductors. A larger conductor can handle higher temperatures and provide a margin of safety.


Documentation

Keep a record of your temperature correction calculations and the ambient temperature measurements you used. This is especially important for commercial and industrial installations.

In conclusion:
Temperature corrections are a critical part of electrical design and installation that are too often neglected. Failing to account for ambient temperature can compromise the safety and reliability of electrical systems. While it might seem like extra work, understanding and applying these corrections is essential for responsible and code-compliant electrical work. Remember, the NEC is a minimum standard – strive for best practices and always prioritize safety. Flag for review

Previous Question Next Question