Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Battery Equivalents

User: jmellc, Location: Durham, NC

Asked on: Saturday, November 30, 2024 at 11:32 am EST
Answered on: Thursday, March 6, 2025 at 5:47 am EST

Question: We had a battery module recently lost from a touchless faucet. I think it fell loose from the tape mount & was discarded by someone. We pulled a battery module from a spare faucet and replaced it, all good. But now we need to replace the one we robbed. This takes 6 AA batteries. The modules cannot be ordered from our supplier and we have no brackets on hand. I do have a few 9 volt snap caps so I'm thinking of putting a few 9 volt batteries in series to give it the amps needed. I saw 1 article stating that the 6 AA batteries give more amps than a single 9V but no ratios to use. Have any of you dealt with this or know of a good chart? Thanks for any help. I have plenty of scrap material to make a mounting plate of sorts.

Let's break down why using 9V batteries as a direct replacement for 6 AA batteries in your touchless faucet is problematic, and then explore better alternatives.

Why 9V Batteries Aren't a Good Direct Replacement



Current (Amperage) Capability

This is the biggest issue. AA batteries are designed to deliver sustained current. 9V batteries are designed for low-current applications like smoke detectors and remote controls. While the voltage might seem comparable, the
ability to supply enough current for the faucet to operate reliably is the critical factor. Think of voltage like water pressure in a pipe, and amperage like the diameter of the pipe. You might have the same water pressure (voltage) in a narrow pipe as a wide pipe, but the narrow pipe can't deliver the same volume of water (current). Touchless faucets, especially when the solenoid valve is opening, require a surge of current. AAs can handle this; 9Vs typically cannot. Using multiple 9Vs in series won't fix this; series connections mainly increase voltage, not current capacity.

Internal Resistance

9V batteries have a higher internal resistance than AAs. This means they lose more energy as heat when delivering current, further reducing their lifespan and ability to power the faucet effectively.

Battery Life

9V batteries will drain very quickly in an application designed for the much greater energy capacity of 6 AAs. You'll be replacing them constantly.


Cost

9V batteries are significantly more expensive than AA batteries, especially when you consider the number needed and their shorter lifespan in this application.

Safety

While unlikely to cause a fire with a faucet, forcing a 9V battery to deliver more current than it's designed for can lead to overheating and potential damage.

Why the Article is Correct About Amps

The article you read is correct. AAs, even individual ones, can deliver significantly more current than a single 9V battery. AAs are built for higher drain devices, while 9Vs are not.

Better Solutions & Considerations


Find a Compatible Battery Holder

This is the
ideal solution. Even if you can't get the exact module, look for generic AA battery holders that can hold 6 AAs in series. You can find these online (Amazon, eBay, electronics suppliers like Digi-Key or Mouser) for a few dollars. Search for "6 AA battery holder series." You'll want one with wires extending from it so you can connect it to the faucet's power input. You can then fabricate a simple bracket to hold the battery holder in place.2.

DIY Battery Pack (If Comfortable with Electronics)

You could create your own battery pack using individual AA battery clips/holders and connecting them in series. This requires basic soldering skills.3.

Check if the Faucet Can Run on Lower Voltage (Least Likely, but Worth Investigating)

Carefully inspect the faucet and/or its wiring diagram (if you have it). See if there's any indication of the voltage range it can operate on. It's highly unlikely it will run correctly on lower voltage, but it's worth a quick check. Do not experiment with different voltages without understanding the potential risks. You could damage the faucet's electronics.4.

Contact the Faucet Manufacturer Directly

If possible, contact the faucet manufacturer directly (not just your supplier). They might be able to provide a replacement battery module or offer more technical specifications.5.

Salvage from Other Broken Faucets

If you have other broken touchless faucets (even different brands), see if their battery modules are compatible or if you can salvage the battery connectors.

How to Calculate Voltage and Current in Series



Voltage in Series

When batteries are connected in series (positive to negative), the voltages add up. So, six 1.5V AA batteries in series will give you 9V (6 x 1.5V = 9V). Connecting 100 of them in series will do nothing if the Amps is 0.

Current (Amps) in Series

The current capacity (amps) of the circuit is limited by the
lowest amp rating in the series. So, even if you connect six 9V batteries (which might be around 0.5 amps each, though this varies greatly), the overall usable* current is still going to be very low and probably not enough for the faucet.

In summary: Do not use 9V batteries as a direct replacement for AA batteries in your touchless faucet. It will not work reliably, will be costly, and could potentially damage the faucet. Focus on finding a suitable AA battery holder and fabricating a mounting bracket.
Flag for review

Previous Question Next Question