Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Arc fault problems

User: dave blethen, Location: glen spey ny

Asked on: Monday, December 2, 2024 at 5:31 pm EST
Answered on: Thursday, March 6, 2025 at 5:49 am EST

Question: Has anyone had a problem with the arc fault breakers after a solar system was installed we wired the house 2 years ago now all the arc faults keep tripping. I was told to put in arc gfi combo breakers this will solve the problem. This doesn’t make sense to me but. I tried it and for 2 days no trips anyone know why.

Okay, let's break down why arc fault breakers might be tripping after solar installation and why AFCI/GFCI combo breakers might seem to temporarily alleviate the issue. This is a complex issue, and I'll give you a thorough explanation with potential causes and troubleshooting steps.

Why Arc Fault Breakers Trip (Generally)

Arc fault circuit interrupters (AFCIs) are designed to detect dangerous arcing conditions in your electrical wiring. Arcing can be a sign of: Loose connections

A wire not properly tightened in a receptacle, switch, or breaker.


Damaged wiring

Nails/screws through wires, rodent damage, or insulation breakdown.

Worn-out appliances

Motors with failing brushes, frayed cords, etc.


Overloaded circuits (sometimes)

Can cause enough heat to trigger an arc fault.

Why Solar Can Cause AFCI Issues


Solar inverters can introduce "electrical noise" or harmonic distortion into the electrical system. This noise can sometimes be misinterpreted by AFCI breakers as a legitimate arcing fault. This is the most common reason. Other reasons include: Shared Neutrals

If the solar system is improperly grounded or uses shared neutrals with circuits protected by AFCIs, it can create a path for current that looks like an arc fault.


Inverter Quality

Some lower-quality inverters produce more electrical noise than others, making them more likely to cause AFCI trips.

Inverter Location/Wiring

How the inverter is wired and where it's located relative to the AFCI-protected circuits can influence the amount of noise that gets into those circuits.


Ground Faults

Although AFCI and GFCI are different types of protection, a small ground fault may sometimes influence AFCI behavior, and vice versa.

Why AFCI/GFCI Combo Breakers Seem to Help (Temporarily or Partially)


Here's the tricky part. AFCI/GFCI combo breakers combine arc fault and ground fault protection. There are a few reasons why switching to these might seem to help, at least initially:1. Tolerance Differences

AFCI/GFCI combo breakers can sometimes have different sensitivity levels or algorithms for detecting arc faults compared to standard AFCI breakers. It's possible that the combo breaker is simply less sensitive to the noise from the solar inverter.

This doesn't fix the underlying problem; it just masks it.
2. Ground Fault Detection

It is possible that there is a small ground fault in the system that is influenced by the solar installation. The GFCI portion of the breaker may be mitigating this issue, preventing the AFCI from tripping.3.

"Reset" Effect

Sometimes, the act of replacing the breaker, tightening connections during the process, or a slight shift in wiring can temporarily reduce the issue. However, if the root cause is still there (e.g., inverter noise, shared neutral), the problem will likely return.

Why It Doesn't Make Sense (and Why It's Not a Real Solution)


Replacing AFCIs with AFCI/GFCI combos solely to stop nuisance tripping from solar is generally not the correct solution in the long run. Here's why: Masking, Not Fixing

You're potentially masking a real problem. If there
is a legitimate arcing fault, the AFCI/GFCI might not be as sensitive to it, leaving you with a fire hazard.

Code Compliance

AFCIs are required by code in many areas for certain circuits (bedrooms, living rooms, etc.). Replacing them with something less sensitive could violate code.

False Sense of Security

You might think the problem is solved when it's really just being hidden.


Doesn't Address the Source

The real solution is to identify and eliminate the source of the problem (e.g., inverter noise, wiring issues).

Troubleshooting Steps (The Right Way)


Here's how to properly troubleshoot this situation:1. Inverter Isolation

The first step is to determine if the solar inverter is the cause. Temporarily disconnect the inverter from the electrical system (following proper safety procedures and qualified personnel only!). Monitor the AFCI breakers. If the tripping stops with the inverter disconnected, the inverter is the likely culprit.2.

Inverter Quality and Settings



Check Inverter Specs

Look at the inverter's specifications for total harmonic distortion (THD). A lower THD is better.


Inverter Filtering

Some inverters have built-in filters to reduce electrical noise. Make sure these filters are enabled and working correctly.

Talk to Inverter Manufacturer

Contact the inverter manufacturer's technical support. They may have specific recommendations for dealing with AFCI compatibility issues. They may have firmware updates or filters that can help.3.

Wiring Inspection



Grounding

Ensure the solar system is properly grounded according to code and the manufacturer's instructions. Improper grounding is a common cause of issues.

Neutral Connections

Carefully inspect all neutral connections, especially where the solar system connects to the main panel. Look for shared neutrals.


Wiring Quality

Check for any signs of damaged wiring (nicks, cuts, rodent damage) in the circuits protected by AFCIs.

Loose Connections

Tighten all connections in receptacles, switches, and breakers.4.

Circuit Mapping and Load Analysis



Map Circuits

Create a detailed map of all circuits protected by AFCIs, showing what outlets and appliances are on each circuit.

Load Analysis

Monitor the load on each circuit. Overloaded circuits can sometimes contribute to AFCI tripping.5.

AFCI Compatibility



AFCI Type

There are different types of AFCIs (branch/feeder, combination). Ensure you're using the correct type for your application.

Breaker Manufacturer

Sometimes, certain brands of AFCIs are more susceptible to nuisance tripping with solar inverters. Consider trying a different brand (but only
after you've ruled out other causes).6.

Professional Help



Licensed Electrician with Solar Experience

This is crucial. Find an electrician who is experienced with solar installations and AFCI issues. They have the tools and knowledge to properly diagnose and fix the problem.

Solar Installer

If the solar system was recently installed, contact the installer. They may be responsible for ensuring compatibility with your existing electrical system.

Important Safety Considerations
Work with qualified professionals

Electrical work is dangerous. Always hire licensed electricians for installation and repairs.

De-energize circuits

Always turn off the power to circuits before working on them.


Follow manufacturer's instructions

Always follow the manufacturer's instructions for installing and troubleshooting electrical equipment.

In summary:
While AFCI/GFCI combo breakers might seem like a quick fix, they're usually masking the underlying problem. The proper approach is to systematically troubleshoot the system, identify the root cause of the tripping (most likely inverter noise or wiring issues), and correct it. Contact qualified professionals to help you with this process. Flag for review

Previous Question Next Question