Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Manual generator transfer switch(es)

User: junkhound, Location: Renton, WA

Asked on: Tuesday, December 3, 2024 at 12:01 pm EST
Answered on: Thursday, March 6, 2025 at 5:51 am EST

Question: Recent PSE power outage for 4-5 days in area due to PNW 'bomb cyclone'Our church food bank has 8 each 600W commercial freezers and refrigeratorsMember will donate an 8 kW generator, problem is how to hookup low cost (very limited funds as typical of chruches these days).My estimate is that the permits (over $200 alone here for even a single outlet) and a subpanel with manual transfer switch would be near $500 with volunteer labor.(all refrigerators and freezers now plug into 20A outlets fed directly off 4 separate 20 A main panel breakers)Option 1 is obviously to simply run 8 extension cords during any outage to avoid xfer switch and any code issues which would be innconvienient. .Option 2 is my question as per code:What if any code section would prohibit a separate box with 4 20 A outlets, 4 ea 3 way light switches used as transfer switches (common to outlet, one traveller to each of existing panel 20A breaker VIA PLUG AND CORD TO EXISTING REFIGERATO UNIT OUTLETS, the other traveller to a single extension cord via separate non NEC (aircraft surplus breaker) to generator. In case of power outage, all needed than is start generator and plug in main split 120/240 extension cord to generator, and flip 4 switches.Code wise, I do not see any prohibitions against this, with the main extension cord disconnected at each end it is simply a switch box in the refrigeration unit cord.

Okay, let's break down your situation and the code implications of your proposed Option 2. This is a common problem with a lot of potential gotchas, and a solution needs to prioritize safety and code compliance while respecting your budget constraints.

Understanding the Problem Load

You have 8 appliances, each drawing potentially up to 5 amps (600W / 120V). That's a total potential load of 40 amps. However, starting currents of refrigerators and freezers will be significantly higher, even 3x the normal load.


Generator

An 8kW generator can provide about 33 amps continuous at 240V (split between two 120V legs), which is theoretically enough, but starting surges can still be a problem. Make sure to factor in the starting surge.

Budget

You're on a tight budget, which limits your options.


Safety

This is paramount. Improper electrical work can lead to fire, shock, or equipment damage.

Code Compliance

While you want to save money, violating electrical codes can have serious consequences, including fines, insurance issues, and potentially unsafe conditions.

Analysis of Option 2 (The Switch Box)


Your proposed "switch box" with 3-way switches as transfer switches is problematic from a code perspective, and presents a significant safety risk. Here's why:
Improper Use of 3-Way Switches

3-way switches are NOT designed to handle the current of refrigerators and freezers. They are intended for lighting circuits, and they are not rated for inductive loads (motors).

Backfeeding Concerns

Your design introduces a risk of backfeeding power from the generator onto the utility grid. Even if you disconnect the main extension cord at BOTH ends, there is still a chance for accidental connection, which is extremely dangerous for utility workers and could damage the generator and other equipment.


Lack of Overcurrent Protection

While you mention an "aircraft surplus breaker" on the generator side, this is not an appropriate or code-compliant solution. The breaker must be properly sized and matched to the circuit and equipment. Using a surplus, potentially unrated breaker is extremely unsafe.

Unlisted Equipment

The entire setup would be a custom, unlisted, and non-code-compliant device. This is generally a major no-no in electrical work.


Potential for Miswiring

Even with careful labeling, there is a significant risk of miswiring or incorrect operation, leading to damage or safety hazards.

Neutral Issues

The scheme you proposed will likely tie the neutral from the generator to the utility neutral. This is a violation of code.

Why Option 1 (Extension Cords) is Also Problematic


While seemingly simple, running multiple extension cords presents its own set of problems:
Voltage Drop

Long extension cords, especially if undersized, can cause significant voltage drop, which can damage refrigerators/freezers.

Overloading

It's easy to overload an extension cord, leading to overheating and fire.


Trip Hazard

Multiple cords create a tripping hazard.

Inconvenience

It's inconvenient to run and manage multiple cords.


Not a Permanent Solution

This is not a long-term, reliable solution.

A Better Approach: Prioritizing Safety and Code Compliance Within Budget


Here's a breakdown of considerations and a possible solution:1. Consult a Licensed Electrician



This is the most important step.
A licensed electrician can assess your specific situation, advise on code-compliant options, and perform the necessary work safely.2. Prioritize Critical Loads

Determine which refrigerators/freezers are absolutely essential to keep running during an outage. Focus on those first.3.

Proper Transfer Switch

Even on a tight budget, a manual transfer switch is crucial for safety and code compliance.4.

Consider a smaller, more affordable generator that runs only the absolutely essential loads
Potential Solution (Still Requires Electrician Consultation)



Subpanel with Manual Transfer Switch

This is the safest and most code-compliant option.
Install a small subpanel near your existing panel. Install a

manual transfer switch
to switch between utility power and generator power. The transfer switch must be properly rated for the amperage and voltage of your generator and the connected loads. Connect the essential refrigerator/freezer circuits to the subpanel. The electrician can advise on the proper wiring, grounding, and bonding. Interlock Kit (Less Expensive, but Requires Caution)

An interlock kit is a cheaper alternative to a transfer switch. It physically prevents the main breaker and the generator breaker from being on at the same time, preventing backfeeding.

Power Inlet Box

Install a power inlet box on the exterior of the building. This provides a safe and convenient connection point for the generator.

Important Considerations



Permits

Get the necessary permits for any electrical work. It's better to be safe than sorry.

Grounding

Ensure proper grounding of the generator and all electrical equipment.


Load Calculation

Have the electrician perform a load calculation to ensure the generator is adequately sized for the intended load.

Carbon Monoxide

If the generator is indoors or in an enclosed space, install carbon monoxide detectors. Generators produce deadly carbon monoxide gas.


Extension Cord Usage (if unavoidable)

Use heavy-duty, outdoor-rated extension cords of the correct gauge (size). Keep cords as short as possible to minimize voltage drop. Do not overload extension cords. Inspect cords for damage before each use.

In summary, while you're trying to save money, safety and code compliance are non-negotiable. Consult with a licensed electrician to determine the best and safest solution for your situation.
Your proposed "switch box" idea is not a safe or code-compliant option. Flag for review

Previous Question Next Question