Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Residential Service Entrance Overhead Clearance

User: euclid43

Asked on: Thursday, August 7, 2025 at 12:28 pm EDT
Answered on: Thursday, August 7, 2025 at 12:28 pm EDT

Question: I received a notice today about the overhead being too low in the backyard of a resident's property. I always thought that the requirement is at least 10 ft. high minimum. The notice from the power company wants it to be 12 feet high. There's no driveway in the yard, just grass. I've never been required to take it this high.

Okay, this situation sounds frustrating. It's understandable that you're questioning this, especially if your understanding has always been 10 feet. Let's break down what might be happening and what you can do

Understanding the Overhead Clearance Requirements
Varying Requirements

You're right that 10 feet is often the
minimum height for overhead wires. However, the actual required clearance can vary significantly based on several factors:

Voltage

Higher voltage lines require greater clearances.

Location

Wires over areas accessible to vehicles (even if it's just grass) often require higher clearances than those over pedestrian-only areas. Even though there's no designated driveway, the power company might be considering the
potential for vehicle access (e.g., a lawnmower, garden tractor, or even a truck).

Local Codes and Regulations

Cities, counties, and states often have specific electrical codes that supersede the National Electrical Code (NEC) in some cases. These local codes can set higher standards.

Power Company Standards

Power companies themselves often have their
own internal standards that exceed the minimum requirements of the NEC and local codes. They do this for safety, reliability, and to minimize future issues.

Specific Circumstances

The power company might have identified a specific reason for the 12-foot requirement in this instance. For example, they might be planning for future upgrades or anticipate higher traffic in the area.

Why 12 Feet Now?


Several possibilities explain why you're now being asked to meet a 12-foot requirement when you haven't been before: Code/Standard Changes

Electrical codes and power company standards are updated periodically. It's possible that the required clearance has been raised since your last relevant installation.


Increased Safety Focus

Power companies are increasingly focused on safety and may be proactively addressing potential hazards.

New Interpretation

A new inspector or a change in the power company's interpretation of the existing rules could be a factor.


Specific Hazard

The power company might have identified a specific hazard at that location, like frequent deliveries or landscape work in the area that warrants higher clearance.

Steps to Take
1. Contact the Power Company Directly

This is the most important step. Don't rely on assumptions or hearsay. Call the power company and:

Politely inquire about the specific reason for the 12-foot requirement.
Ask for the specific code or standard they are citing. Ask what would happen if you only raise it to 10 ft. Ask if the area is being considered as accessible to vehicles. Even if it's just grass, clarify their rationale. Ask if there are any alternative solutions. Is there a way to move the service line slightly to avoid the clearance issue?2. Document Everything

Keep a record of every conversation you have with the power company, including the date, time, name of the person you spoke with, and a summary of the discussion.3.

Check Local Codes

Search online for your city's or county's electrical codes. Look for sections on overhead clearances. Compare these to the power company's requirements.4.

Consult with a Licensed Electrician

A qualified electrician familiar with local codes and power company requirements can assess the situation and provide expert advice. They can help you understand the specific requirements and determine the best course of action.5.

Consider Appealing (If Necessary)

If you believe the power company's requirement is unreasonable or based on incorrect information, inquire about their appeals process.

Important Considerations
Safety First

Always prioritize safety when working with electricity. Do not attempt to raise or move overhead wires yourself. This is extremely dangerous and should only be done by qualified professionals.

Avoid Assumptions

Don't assume that because you haven't been required to do something in the past, it's not required now. Codes and standards change, and individual circumstances vary.


Compliance is Key

Ultimately, you are generally required to comply with the power company's requirements. Failure to do so could result in them disconnecting your service.

In summary, your best approach is to gather information directly from the power company, understand their reasoning, and consult with a licensed electrician if needed.
Good luck! Flag for review

Previous Question Next Question