User: nizak
Asked on: Thursday, August 7, 2025 at 7:57 pm EDT
Answered on: Thursday, August 7, 2025 at 7:57 pm EDT
Question: Does anyone else find it difficult to torque slotted screws such as breaker terminations and equipment with slotted vs hex lug terminations?Hard to get a good fit on the slot with a variety of different size heads.
You're definitely not alone! Many electricians find slotted screws, especially in breaker terminations and equipment lugs, to be frustrating for several reasons: Poor Fit
Slotted screwdrivers often don't fit the screw slot perfectly. You can have too much play, leading to slippage, or a driver that's too wide and can't seat properly.
Cam-Out
The straight-line design makes it easy for the screwdriver to cam out (slip out of the slot) under pressure, especially when applying high torque. This can damage the screw head, the screwdriver, and potentially your work area.
Damage to Surroundings
When they do slip, you could damage near by bussing, surrounding equipment, or even injure yourself.
Difficulty Achieving Proper Torque
Because of the cam-out issue, it's hard to consistently apply the correct torque. You might overtighten, stripping the threads, or undertighten, leading to loose connections and potential fire hazards.
Screwdriver Bit Wear
Cam-out wears down the screwdriver bit quickly.
Ergonomics
The required force and awkward angles often involved in torquing slotted screws can be hard on the wrist and arm.
Outdated Design
Compared to other screw head designs (like Phillips, square/Robertson, or Torx), slotted screws are generally considered an older, less efficient design for high-torque applications.
Why are they still used?
Despite the drawbacks, slotted screws persist for a few reasons: Cost
They are generally cheaper to manufacture than screws with more complex head designs.
Historical Reasons/Legacy Systems
Some older equipment was originally designed for slotted screws, and manufacturers may continue to use them to maintain compatibility or avoid redesign costs.
Simplicity
Slotted screws require only a simple, readily available screwdriver.
Vandal Resistance
In some specific applications, the ubiquity of slotted screwdrivers is seen as a slight deterrent to unauthorized access (though it's a weak deterrent).
Tips and Strategies for Working with Slotted Screws (Especially Breaker/Lug Terminations)
Use the Right Size and Type of Screwdriver
This is paramount. Try several sizes of flathead screwdrivers to find the one that fits the slot most snugly with minimal play. The screwdriver should fill the slot as fully as possible without being too wide.2.
Quality Screwdrivers
Invest in high-quality screwdrivers with hardened tips. Cheap screwdrivers will wear out quickly and are more prone to cam-out. Wera, Wiha, and Klein are popular brands.3.
Apply Proper Pressure
Push the screwdriver firmly into the slot with consistent pressure to prevent cam-out. Avoid angling the screwdriver.4.
Torque Screwdrivers
Use a torque screwdriver or torque wrench with a slotted bit if available. This is the best way to ensure accurate torque. Calibrated torque tools are essential for critical connections.5.
Visual Inspection
After tightening, visually inspect the connection to ensure the conductor is properly seated and the screw head is flush.6.
Consider Screw Alternatives (If Possible)
If you're doing a complete equipment replacement or modification, see if you can replace the slotted screws with screws that use a more secure head type (e.g., hex head, Torx). This is often not practical, but worth considering in some situations.7.
Clean the Slot
Make sure the slot is free of debris or corrosion before inserting the screwdriver.8.
Use a Screwdriver with Parallel Blades
Not all flathead screwdrivers are created equal. Some have tapered blades, while others have parallel blades. Parallel blades will often provide a better, more secure fit in the screw slot.9.
Slightly Chamfer the Screw Slot (Carefully)
In some rare cases, if the slot is particularly rough or burred, you might* be able to carefully use a small file or deburring tool to slightly chamfer the edges of the slot.
This is a last resort and should be done with extreme caution, as you don't want to damage the screw or remove too much material.10. Start with a Manual Screwdriver: If using a power driver (even a torque-limiting one), consider starting the screw by hand to ensure it's properly aligned and seated before using the power tool. This can help prevent cross-threading or stripping.In conclusion, dealing with slotted screws, especially in electrical terminations, requires patience, good technique, and the right tools. Using the correct screwdriver size, applying steady pressure, and employing a torque screwdriver when possible can significantly improve the process and ensure a safe and reliable connection. You're not alone in finding them frustrating, and the tips above should help you manage the situation more effectively. Flag for review