User: clemver, Location: PA
Asked on: Friday, August 8, 2025 at 10:51 am EDT
Answered on: Friday, August 8, 2025 at 10:52 am EDT
Question: Where Im at, when we do a service changes/upgrades, disconnect and reconnect at the weather head is on us. The POCO can't be bothered to come out to cut and reconnect.Coming from a company where the owner swore by Insulated bugs, that's all I've ever used. Now that im out on my own, I want to start using crimps. Have a few questions on those:-from what I've seen online the crimps are size specific. I know id be getting ones with either 4/0 or #2 on one side (really only doing resi right now), but the other side its always hard to tell what size POCO ran to the house. Do you typically just keep on hand an assortment of size?-what crimper do you swear by? Manual is fine but if there's a battery powered out there id be interested.-overall, what is in your hand when you go to crimp a service cable at a weatherhead? (What type of crimps, what type of covering, what type of crimper, etc)Thanks!
Okay, sounds like you're making a solid move to improve your service connections. Let's break down your questions about crimps for service upgrades, especially considering the POCO isn't handling the disconnect/reconnect.1. Crimp Size Variety
Yes, you'll absolutely want an assortment. You're correct that the utility conductor size is often an unknown until you're up there. It's better to be prepared than to have to make a trip to the supply house mid-job. Common Sizes
In your residential work, focus on having crimps that accommodate: 4/0 AL to #2 CU/AL (your standard homeowner service upgrade side) 4/0 AL to 4/0 AL (if you happen to get into larger services) #2 CU to #2 CU (smaller older services you might be upgrading) Consider smaller sizes like #6 or #8 CU to handle some older services as well.
Inventory Management
Keep a small, organized stock of the common sizes. Clearly labeled boxes are your friend. After a few jobs, you'll get a better sense of what sizes are most common in your area.
2. Crimper Recommendations
Manual Crimpers
Burndy MD6
This is an industry workhorse. It's manual, reliable, and handles a wide range of connector sizes. Dies are readily available for it. It's simple, durable, and doesn't require batteries. This is a safe and easy to use option.
Greenlee 60191
Another popular manual crimper. Similar in capabilities and reliability to the Burndy.
General Considerations for Manual
Look for one with a "ratcheting" mechanism. This ensures a complete and proper crimp every time, as the handles won't release until the correct pressure is applied.
Battery-Powered Crimpers
Milwaukee M18 Force Logic
This is the most popular battery powered option. It's lightweight and compact, easy to use in the bucket and delivers a solid crimp. This has automatic pressure release, so no chance of over crimping.
Greenlee ES32LX11
Greenlee makes some high-end battery-powered options as well.
Key Considerations for Crimper Choice
Crimping Force
The crimper must provide the correct force for the connectors you're using. This is usually measured in tons.
Die Compatibility
Ensure the crimper uses dies that match the crimps you'll be using. Most crimp manufacturers will have a die and tool recommendation.
Comfort and Ergonomics
If you're doing a lot of crimps, a comfortable, well-balanced tool is essential.
Cost
Battery-powered crimpers are a significant investment. Weigh the cost against the time savings and convenience. For occasional service upgrades, a good manual crimper might be sufficient.
3. Your Crimp Kit at the Weatherhead
Here's a breakdown of what you should have in your tool bag/bucket:
Personal Protective Equipment (PPE)
Insulated Gloves (rated for the voltage you're working on) Safety Glasses Arc Flash Rated Clothing (if required)
Tools
Your Chosen Crimper (manual or battery-powered) Appropriate Dies for the Crimper and Connectors Wire Strippers/Cutters (rated for the conductor size) Lineman's Pliers Screwdrivers (assorted sizes) Voltage Tester (to verify the line is de-energized) Knife or Utility Blade Measuring Tape Torque Wrench (for bolted connections if applicable)
Connectors and Materials
Dual-Rated Crimps (Aluminum/Copper)
You want connectors specifically designed for joining aluminum and copper conductors if there is a mix. Many are dual-rated now.
Sizes
Enough of the common sizes discussed above (4/0-2, 4/0-4/0, 2-2, smaller sizes).
Heat Shrink Tubing
High-quality, adhesive-lined heat shrink tubing that is rated for direct burial. This provides excellent moisture sealing and insulation. Choose a size that fits snugly over the crimped connector and part of the conductor insulation.
Electrical Tape
As a backup and for extra protection, although the heat shrink should be the primary insulation.
Oxide Inhibitor (Penetrox or similar)
Apply this liberally to the aluminum conductors before crimping. This prevents corrosion and ensures a good electrical connection.
Silicone Grease
Use on copper connections to provide extra protection from moisture.
Cable Ties/Zip Ties
To secure the service conductors neatly.
Anti-Seize
To be used on threaded parts.
Process
Safety First
Verify the service is de-energized before touching anything. Double-check.2.
Prepare Conductors
Carefully strip the insulation back to the proper length, being careful not to nick the conductors. Clean the aluminum conductors thoroughly.3.
Apply Oxide Inhibitor
Generously coat the exposed aluminum conductor with oxide inhibitor.4.
Crimp
Insert both conductors into the crimp connector, making sure they are fully seated. Use the correct die for the connector and conductor size. Crimp according to the manufacturer's instructions (typically multiple crimps per connector).5.
Clean
Clean the crimp.6.
Heat Shrink
Slide the heat shrink tubing over the connector, centering it. Use a heat gun to shrink the tubing, starting from the center and working outward to avoid trapping air. Ensure the adhesive lining seals tightly to the conductor insulation.7.
Tape (Optional)
Wrap with electrical tape for added protection, if desired.8.
Secure Conductors
Neatly arrange the service conductors and secure them with cable ties to the weatherhead mast or service entrance cable.9.
Clean Up
Remove any debris or leftover materials.
Important Considerations
Read the Instructions
Always follow the manufacturer's instructions for the crimp connectors and the crimper. This includes the correct die selection, crimping procedure, and number of crimps.
Inspect Your Work
After crimping, visually inspect the connection to ensure it's solid and that the crimp is properly formed. If in doubt, re-crimp.
Continuous Learning
Stay up-to-date on the latest industry best practices for crimping and service connections. Attend training seminars or workshops as needed.*
Local Codes and Regulations: Be sure your work complies with all applicable local electrical codes and utility company requirements.By following these guidelines and building a well-equipped crimping kit, you'll be able to create reliable, long-lasting service connections that meet the highest standards of quality and safety. Flag for review