User: Connect, Location: Florida
Asked on: Sunday, August 17, 2025 at 9:39 am EDT
Answered on: Sunday, August 17, 2025 at 9:51 am EDT
Question: I had just changed an existing 100amp branch circuit panel and meter can to a 200amp ringed meter/main.It passed inspection but when FPL came back for the reconnect FPL said it was a banned meter can.The city inspector was unaware of this change and was a huge expense to eat.Beware!
That's a really frustrating and expensive situation. Thanks for sharing this warning, as it's important for others to be aware. Here's a breakdown of the situation and what others can learn from it
Key Takeaways and Lessons Learned:
Utility Company (FPL) Rules are Paramount
Even if your local electrical inspector signs off on the work, the utility company's requirements for meter cans/meter mains are the final say. They own and maintain the connection point from the street to your system, and their equipment standards are what matter.
Confirm with the Utility Company Before Work Starts
This is the single most important thing you can do. Before buying any equipment or starting any work, call FPL and ask them to confirm the specific meter can/meter main requirements for your location and your new service size. Get it in writing if possible (e.g., an email).
Local Inspectors May Not Be Fully Up-to-Date
Electrical codes change, and utility requirements can be even more dynamic. The inspector likely passed your work based on code compliance, but might not have been aware of FPL's specific banned equipment list.
'Ringed' vs. 'Ringless' Meter Cans
Be extra diligent if you are using a ringed meter can. Many utilities, including FPL, have been phasing out ringed meter cans and requiring ringless designs for new installations and upgrades.
Responsibility Lies with the Contractor/Homeowner
Ultimately, the responsibility for ensuring the installation meets all applicable standards (code and utility) falls on the electrician and/or the homeowner if they are doing the work themselves.
Document Everything
Keep records of all communications with the utility company, equipment specifications, and inspection reports. This can be helpful if you need to appeal a decision or demonstrate that you took reasonable steps to comply.
Double Check with the Manufacturer
Many companies (like Milbank) have configurators that will allow you to input your FPL number and get a list of approved service equipment.
Potential Reasons Why a Meter Can Might Be Banned
Ringed vs. Ringless Design
As mentioned, many utilities are moving away from ringed meter cans due to security concerns and potential for tampering.
Outdated Model
Older models of meter cans might not meet current safety or performance standards.
Insufficient Ampacity Rating
The meter can must be rated for the full 200 amps (or more, depending on the application).
Incorrect Wiring Configuration
The internal wiring and connections within the meter can must be correct and compatible with FPL's system.
Listing/Certification
The meter can must be listed by a recognized testing laboratory (e.g., UL) and properly labeled.
FPL Specific Requirements
FPL has their own specifications and preferred manufacturers.
What To Do Now
Contact FPL Directly
Speak to a supervisor or someone in the engineering/connection department to understand the exact reason the meter can was rejected. Get the specific regulation or requirement that it failed to meet.2.
Consult with Your Electrician
Discuss the situation with your electrician. They should have experience working with FPL and be able to help you find a compliant replacement meter can.3.
Explore Options for the Old Meter Can
See if you can return the meter can to the supplier. If not, try to sell it to someone who may be in an area that still allows it.4.
Appeal the Inspector if Possible
See if the city will work with you to reduce the costs involved.5.
Install a Compliant Meter Can: Purchase and install a meter can that is approved* by FPL for your location and service size.Again, thank you for sharing this experience. It's a valuable reminder to always check with the utility company before starting any electrical work involving the service connection. Flag for review