Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Non-Metallic Tubing Conduit in a Health Care Occupancy - NEC 2019 Edition

User: Clint4539, Location: Florida

Asked on: Monday, August 18, 2025 at 7:52 am EDT
Answered on: Monday, August 18, 2025 at 8:06 am EDT

Question: Hello everyone.I work maintenance in a nursing home and we had some renovation work done where the linked material was used as conduit in a patient care area. I do not know enough about the NEC to determine whether this product is compliant or not, but it does not seem correct to me. Is there anyone who can show me an NEC 2019 Edition code reference that either allows it or does not allow it?Thank you,Clint

Okay, Clint, I can help you with that. Let's break down the issue of using flexible nonmetallic tubing (ENT) in a patient care area and look for the relevant NEC 2019 code sections.First, can you please provide the link to the material in question? I need to be able to identify exactly what material was used to provide a more accurate analysis.In the meantime, I can provide a general analysis and guidance based on my experience and the general requirements of the NEC.

General Concerns About ENT in Patient Care Areas

Patient care areas in healthcare facilities have stricter requirements due to the increased risk to patients. Reliable grounding, minimizing shock hazards, and maintaining electrical isolation are critical. ENT, while suitable for many general applications, has limitations that can make it problematic in these sensitive areas.

Relevant NEC 2019 Code Sections to Investigate

Here are some key areas in the NEC 2019 you need to review to determine compliance, assuming this installation falls under the definition of patient care area (which it likely does in a nursing home): Article 517: Health Care Facilities

This entire article is dedicated to the specific electrical requirements for healthcare facilities. This is where you'll find the most relevant rules.


517.13 Grounding of Receptacles and Fixed Electrical Equipment in Patient Care Areas

This section is critical. It mandates specific grounding requirements for receptacles and equipment in patient care areas to minimize shock hazards. The method of grounding is important. ENT alone cannot provide an equipment grounding path.

517.13(A) General Care Areas



517.13(B) Critical Care Areas

These sections dictate the acceptable wiring methods in these locations.

362: Electrical Nonmetallic Tubing (ENT)

This article covers the uses permitted and not permitted for ENT.


362.10 Uses Permitted

Read this carefully to see where ENT is allowed.

362.12 Uses Not Permitted

This is equally important. It lists specific situations where ENT cannot be used. Pay attention to any restrictions related to the type of occupancy or the presence of sensitive electronic equipment.


300: General Requirements for Wiring Methods and Materials

This article contains basic rules that apply to all wiring installations.

300.3(B) Conductors of the Same Circuit

All conductors of a circuit, including the equipment grounding conductor, must be installed in the same raceway or cable. This is important for impedance and ground fault protection.


300.12 Mechanical Continuity - Raceways and Cables

Raceways and cables must be mechanically continuous between boxes, cabinets, and fittings.

300.10 Electrical Continuity of Metal Raceways and Enclosures

Metal raceways, cable armor, and other metal enclosures must be electrically continuous.

Key Considerations and Questions to Answer
1. Is the area truly a "patient care area" as defined by the NEC? This is the first question. The definition in Article 517 is important.2. How is equipment grounding being achieved? ENT cannot be used as an equipment grounding conductor. There must be a separate equipment grounding conductor (insulated green wire) pulled inside the ENT. If the equipment grounding is relying solely on the ENT itself, it is a violation.3. What type of equipment is being supplied by the wiring in the ENT? Some equipment, especially in critical care areas, may have stricter wiring method requirements.4. What does the product listing of the ENT say? The manufacturer's instructions and listing (e.g., UL listing) will specify the approved uses and limitations of the ENT.5. Are there any local amendments to the NEC in your jurisdiction? Your local building codes may have additional restrictions on wiring methods in healthcare facilities.

Why ENT
Might Be Problematic Lack of Grounding

ENT is non-metallic and cannot provide a reliable equipment grounding path on its own. This is the biggest concern.

Mechanical Protection

ENT is more susceptible to physical damage than metal conduit. In a busy nursing home environment, this could be a concern.


Fire Resistance

Depending on the type of ENT, it may not offer the same level of fire resistance as metal conduit.

How to Proceed
1. Obtain the SPECIFIC product information

Get the manufacturer's name and model number of the ENT that was used. Look up the product listing on the manufacturer's website or UL's website to find its approved uses and limitations.2.

Inspect the installation

Carefully examine how the ENT was installed, paying close attention to the grounding method. Verify that an insulated equipment grounding conductor was pulled inside the ENT.3.

Consult with a Qualified Electrical Contractor

If you are unsure about the compliance of the installation, the best course of action is to consult with a licensed and experienced electrical contractor who is familiar with healthcare facility electrical requirements and the NEC. They can assess the situation and provide a professional opinion.4.

Contact Your Local Authority Having Jurisdiction (AHJ)

The AHJ (building inspector, electrical inspector) has the final say on code compliance. If you have serious concerns, contact them for clarification.

Disclaimer:


I am an AI Chatbot and cannot provide definitive legal or electrical code interpretations. This information is for general guidance only. You must consult with qualified professionals to determine compliance with applicable codes and regulations.I am ready to provide a more accurate analysis once you send me the link to the material in question. Flag for review

Previous Question Next Question