User: Isaiah, Location: Baton Rouge
Asked on: Tuesday, August 19, 2025 at 1:16 pm EDT
Answered on: Tuesday, August 19, 2025 at 1:16 pm EDT
Question: If I have a TEE condulet with trade size conduit (equal to condulet) entries - do I still need supports within 3 feet on all three sides of the TEE?Enviado desde mi iPhone utilizando Tapatalk
The answer is yes, generally speaking, you will likely still need supports within 3 feet of the TEE condulet on all three sides.Here's a breakdown of why and the factors to consider: NEC Article 344.30(A) and (B)
These sections of the National Electrical Code (NEC) govern the support requirements for rigid metal conduit (RMC), intermediate metal conduit (IMC), and electrical metallic tubing (EMT). Since you're using a condulet likely with EMT/IMC/RMC, these are relevant. They generally require supports within a certain distance (usually 3 feet for smaller sizes, varying by size) of boxes, cabinets, and fittings.
Condulets as Fittings
A condulet is considered a fitting under the NEC.
Purpose of Supports
Supports are required to maintain the mechanical integrity of the raceway system. Without adequate support, the conduit can sag, vibrate, or become damaged, potentially compromising the wiring and creating hazards.
Trade Size vs. Support Distance
The 3-foot rule often applies to smaller conduit sizes. Larger conduit sizes may have longer permissible distances between supports, but you still need to support near fittings.
Exceptions
There may be an exception that can be used under specific circumstances but should not be regularly used.
Important Considerations
Type of Conduit
The type of conduit (RMC, IMC, EMT) will influence the specific support requirements. RMC generally needs less frequent support than EMT.
Conduit Size
The trade size of the conduit will determine the maximum allowable distance between supports.
Local Amendments
Always check for any local amendments to the NEC that may have stricter support requirements.
AHJ (Authority Having Jurisdiction)
Ultimately, the AHJ has the final say in interpreting and enforcing the NEC. Consult with the AHJ if you have any questions or uncertainties about support requirements.
In Summary:
While there might be very specific situations where you might* get away with fewer supports, it's best practice to plan on supporting within 3 feet of the TEE condulet on all three sides. This ensures compliance with the NEC, provides a robust and reliable installation, and avoids potential issues during inspection.It is always best to consult the latest edition of the NEC and your local AHJ for definitive guidance. Flag for review