User: alyoshak24, Location: Chicago
Asked on: Tuesday, August 19, 2025 at 8:59 pm EDT
Answered on: Tuesday, August 19, 2025 at 8:59 pm EDT
Question: Hi all,Can you guys please help me with the screw that goes in between this breaker ? i am trying to figure out if this screw is a 6-32 or a thinner machine screw. I have a customer who does NOT want to replace the panel only the breaker but the replacement breaker ordered did not come with the screw and his panel's main breaker is only hanging on by the breaker and how the legs are positioned.
Okay, this is a common problem and a safety concern. Let's figure out the screw.
The Likely Scenario
The screw you're talking about is almost certainly a 6-32 machine screw. This is the standard size for many breaker connections.
Why 6-32 is Likely Industry Standard
6-32 is a very common size for terminal connections in electrical equipment, especially breakers.
Fine Thread
Machine screws have a fine thread, which is important for a secure electrical connection.
Tensile Strength
Screws are designed to withstand the proper torque applied.
How to Verify (Important!)1. Best Option: Check the Old Breaker (If Available)
If you have the old breaker that was removed, try to find a screw that fits in the existing screw hole in the breaker. That is the most accurate way to determine the size.2.
6-32 is the Standard: If you do not have the old breaker available to check the threads on. a 6-32 screw is the standard and a good starting point.
Where to Get the Screw Electrical Supply House
This is your BEST option. They will have the correct type of screw (machine screw) and the correct metal type (usually steel) which is important for a secure electrical connection.
Hardware Store
If you absolutely have to go to a hardware store, make sure you get a machine screw (not a wood screw or sheet metal screw). Ask for a 6-32 machine screw and ideally one that's steel. Stainless steel is also acceptable.
Online Retailers (Amazon, etc.)
Be very careful ordering online. Make sure the screw is clearly labeled as a machine screw and that the description specifies the size (6-32).
Important Safety Considerations De-energize
Always de-energize the panel before working on the breaker. This means turning off the main breaker. If the main breaker is compromised, call a qualified electrician to safely disconnect the power to the panel.
Proper Torque
Use a torque screwdriver or torque wrench to tighten the screw to the manufacturer's specified torque. Overtightening or undertightening can both lead to problems.
Inspect the Breaker
Make sure the new breaker is the correct type and rating for the panel.
Call an Electrician if Unsure
If you're not comfortable with electrical work, or if you have any doubts about what you're doing, please call a qualified electrician. This is for your safety and the safety of your customer.
Regarding "Hanging on by the Legs"
The fact that the main breaker is only held in place by its stabs and the legs of the bus bar is a serious safety hazard. It needs to be properly secured with the screw. If the screw is missing, it's likely the original one vibrated loose or was never properly tightened.
In summary, get a 6-32 machine screw, make sure the power is off, tighten the screw to the proper torque, and if you have any doubts, call an electrician. Flag for review