Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Pulling temp power

User: Alwayslearningelec, Location: NJ

Asked on: Wednesday, August 20, 2025 at 7:09 am EDT
Answered on: Wednesday, August 20, 2025 at 7:17 am EDT

Question: Was passing by this place and saw there pulling power to a temporary panel from the overhead line. It looks like they're just clamping on to the cables .... No splicer or anything. I assume they are piercing? How is the power being transferred?

You're likely seeing Insulation Piercing Connectors (IPCs) in action. These are specifically designed to "clamp on" to overhead power lines without requiring the conductor to be cut or stripped.Here's how they work and why you're probably seeing them: Insulation Displacement

IPCs have sharp teeth or blades that pierce through the insulation of the overhead power line conductor when the connector is tightened. This establishes a direct electrical connection between the connector and the conductor's metal core.


Sealed and Insulated

The connector is designed to create a waterproof and airtight seal around the connection point. This prevents corrosion, moisture ingress, and accidental contact.

Power Transfer

Once the insulation is pierced and the connector is properly tightened, electricity flows directly from the overhead line conductor, through the IPC, and into the wires connected to the temporary panel.

Why IPCs are Used



Speed and Convenience

They significantly speed up the process of tapping into power lines compared to traditional methods like cutting, stripping, and splicing.

Safety

Reduces the risk of accidental contact with live wires, as the insulation remains intact.


Flexibility

Easy to install and remove, making them suitable for temporary power needs.

Reduced Service Interruption

Often, the power line does not need to be de-energized to install IPCs (though this depends on the voltage and local regulations; live-line work requires specialized training and equipment).

Important Considerations



Trained Personnel

Installing IPCs should only be done by qualified and trained electricians or lineworkers.

Correct Connector Size

It's crucial to use the correct size and type of IPC for the specific conductor size and material of the overhead line.


Proper Tightening

The connector must be tightened to the manufacturer's specified torque to ensure a secure and reliable connection.*

Regulations

Local codes and regulations may dictate specific requirements for using IPCs, including grounding and safety measures.

In summary,
what you're seeing is very likely the use of IPCs. They're a common and accepted method for tapping into overhead power lines for temporary power, as long as they are installed correctly by qualified professionals. Flag for review

Previous Question Next Question