User: g-and-h_electric, Location: northern illinois
Asked on: Wednesday, August 20, 2025 at 11:38 pm EDT
Answered on: Wednesday, August 20, 2025 at 11:47 pm EDT
Question: Ia anyone here familiar with the smart bridge that comes in the CASETA starter kit? I have 2 of the kits which I planned on deploying at the castle. I also have a RADIO RA dimmer. I havent found any definitive info online if both can use the CASETA bridge. If it were to work well, all I would need 7 units total Nothing exotic, just a few simple timers and done.Worst case I will have to buy a few more CASETA'sHoward
You're asking about compatibility between Lutron Caseta Smart Hub and RadioRA 2 dimmers. Here's the breakdown
The Short Answer:
No, a Caseta Smart Hub cannot control RadioRA 2 devices. They are different systems that use different communication protocols.
The Explanation
Caseta
Uses Lutron's Clear Connect RF protocol in the 434 MHz band. It's designed for simpler, whole-home solutions and is typically more DIY-friendly.
RadioRA 2
Uses Lutron's proprietary Clear Connect RF technology operating at a different frequency (usually in the 430-434 MHz band), uses a hub different from the one that comes with the Caseta products, and has a wider feature set (complex scheduling, whole-home integration) and requires professional installation for some features.
Why They Aren't Compatible
Different Protocols
They "speak different languages." The Caseta hub can only understand and communicate with devices specifically designed for the Caseta system.
Target Markets
Caseta is aimed at the DIY homeowner, while RadioRA 2 is designed for professional installers and custom home automation. This reflects in the system complexity and the required setup process.
Your Options
Stick with Caseta
The simplest solution. If you only need 7 units and basic timer functionality, buying more Caseta dimmers/switches is probably the most cost-effective and straightforward approach. The Caseta Smart Hub can handle 7 devices without issue (it can handle up to 50 devices total).2.
RadioRA 2 System
If you want to use that RadioRA 2 dimmer and the RadioRA 2 system meets your needs better, you'll need to get a RadioRA 2 main repeater (the hub for RadioRA 2). This will require buying the correct hub, and as mentioned before, potentially finding an installer.3.
Mixed System with a 3rd-Party Hub (Generally Not Recommended for Simplicity)
While technically possible to integrate Caseta and RadioRA 2 through a sophisticated home automation hub like Hubitat, Home Assistant, or Crestron/Control4, it adds significant complexity, requires technical expertise, and introduces points of failure. I strongly advise against this unless you're a very experienced home automation enthusiast.
Recommendation:
For your stated needs (7 units, simple timers), sticking with the Caseta system is the far superior choice. It's simpler, cheaper, and will achieve your desired functionality without unnecessary complexity. Just purchase a few more Caseta dimmers/switches to complete your setup. Flag for review