Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Stupid question, but here goes…

User: Mgarf33, Location: Virginia Beach, Va

Asked on: Saturday, August 23, 2025 at 8:57 pm EDT
Answered on: Saturday, August 23, 2025 at 8:58 pm EDT

Question: So, if you were to get a call from a residential customer needing a panel replacement due to a lightning strike which caused the house to catch fire, would you replace the breakers?I ask because my brother called me after having this work performed.

That's a really good and important question. Here's a breakdown of what would typically be recommended and why, along with considerations for your brother's situation

Generally, Yes, Breakers Should Be Replaced or Thoroughly Tested After a Fire Caused by Lightning:

Here's the rationale: Lightning Damage is Unpredictable

Lightning is a powerful surge that can travel through wiring in unpredictable ways. While a breaker
might look okay from the outside, the internal components could be compromised. Lightning can cause:

Weakened Components

Internal arcing, microscopic fractures, or burned contacts. These weaknesses might not be immediately apparent but can lead to future failures.

Calibration Issues

Lightning can alter the breaker's trip curve, meaning it might not trip at the correct amperage, leading to overloads and potential fire hazards down the line.


Hidden Damage

The breaker's mechanism could be damaged, causing it to stick or fail to trip when needed.

Safety First

Breakers are critical safety devices. After a fire, especially one caused by lightning, the reliability of those breakers is questionable. It's a safety-critical situation where erring on the side of caution is paramount.


Code Compliance

While local codes vary, many jurisdictions require a complete inspection and replacement of potentially damaged electrical components after a fire. An electrician should be aware of local requirements.

Insurance Considerations

Insurance companies often prefer or require replacement of electrical components after a fire to mitigate future risks and potential liabilities.

Here's what a responsible electrician
should do in this scenario


Inspect

A thorough inspection of all the breakers is a must. However, a visual inspection alone is
not sufficient.2.

Testing

Ideally, breakers should be tested with specialized equipment to verify their trip curves and functionality. This is more common in commercial/industrial settings, but could still be a viable option.3.

Recommendation

Based on the inspection and testing (or lack thereof, due to cost), the electrician should provide a clear recommendation. A responsible electrician would strongly recommend replacing the breakers.4.

Documentation

The electrician should document the condition of the breakers, the testing performed (if any), and the recommendations made.

Important Considerations for Your Brother's Situation



Was the electrician aware the fire was due to lightning?
This is crucial. The electrician should have been more cautious knowing this. What did the electrician say about the breakers? Did they say they looked okay? Did they mention any testing? Was a full electrical inspection performed? The panel replacement should have been part of a broader inspection of the entire electrical system. Permits and Inspections

Was the work permitted and inspected by a local authority? This provides an extra layer of oversight.


Insurance

Is he going through insurance? The insurance adjuster should be consulted about the breakers.

What your brother can do


Review the Invoice/Contract

Carefully examine the documentation from the electrician to see what was said about the breakers.2.

Contact the Electrician

Call the electrician back and ask specifically about the breakers. Ask: "Given the fire was caused by lightning, what testing did you perform on the breakers?" "Why did you choose to reuse the breakers instead of replacing them?" "Are you 100% confident that the breakers are functioning correctly and will trip as designed?"3.

Second Opinion

It might be worthwhile to get a second opinion from another licensed electrician. Explain the situation and ask for their assessment.4.

Contact the Insurance Company

If your brother is working with an insurance company, contact the adjuster and ask if breaker replacement is covered or recommended.5.

Consider Replacement

If there's any doubt, and the cost isn't prohibitive, replacing the breakers is the safest and most prudent course of action. It's a relatively small price to pay for peace of mind.

In Summary:


While it's not
always a hard and fast rule to replace breakers after any fire, a fire caused by lightning strongly* warrants replacement or, at the very least, thorough testing by a qualified electrician. The risk of hidden damage and future failure is too high to ignore. Your brother should definitely investigate further to ensure his home's electrical system is safe. Flag for review

Previous Question Next Question