Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Separate circuit required for gas dryer in a dwelling unit?

User: cppoly, Location: New York

Asked on: Monday, August 25, 2025 at 4:37 pm EDT
Answered on: Monday, August 25, 2025 at 4:38 pm EDT

Question: In a dwelling unit, can you put the receptacle for a gas dryer on the same 20A circuit for laundry (1,500 VA) or do you need a separate dedicated 20A circuit for the gas dryer? Thanks.

No, you generally cannot put the receptacle for a gas dryer on the same 20A circuit designated for the laundry receptacle (the 1,500 VA one required by code). Here's why: Article 210.11(C)(2) - Laundry Branch Circuits

This section of the National Electrical Code (NEC) requires at least one 20-ampere branch circuit to supply the laundry receptacle outlet(s). The purpose is to handle the high power demands of washing machines and other laundry equipment.


Article 210.23(A)(2) - Permissible Loads

This section dictates what you can connect to a 20-ampere branch circuit. It states that the total cord-and-plug-connected load must not exceed 80% of the branch-circuit rating. That means a maximum of 16 amps (20A x 0.80 = 16A) or 1,920 VA (120V x 16A = 1,920 VA) on a 20-amp circuit.*

Gas Dryer Load

While gas dryers use gas for heat, they still require electricity for the motor, igniter, and controls. The electrical load is usually specified on the dryer's nameplate, and can easily be more than the allowable remaining capacity of that 20A laundry circuit.

Why You Need a Separate Circuit


Overloading

Adding the gas dryer's electrical load to the laundry circuit could easily overload the circuit, causing the breaker to trip frequently, which is both inconvenient and potentially dangerous.2.

Code Compliance

It is unlikely a gas dryer receptacle will be compliant if on the laundry circuit, given the 80% rule of the NEC.3.

Safety

Overloaded circuits can overheat and create a fire hazard.

The general practice is to install a separate, dedicated 15 or 20-amp circuit for the gas dryer receptacle. Check the dryer's nameplate for the exact amp or volt-ampere requirements to determine the appropriate circuit size.
In Summary

Do not put the gas dryer receptacle on the same 20A laundry circuit. Provide a separate circuit for the dryer to ensure safe and code-compliant operation.

Always consult your local electrical codes and a qualified electrician for specific requirements and to ensure safe installation.
Flag for review

Previous Question Next Question