Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Blank cover for 3/4" conduit

User: Alwayslearningelec, Location: NJ

Asked on: Thursday, August 28, 2025 at 3:20 pm EDT
Answered on: Wednesday, September 3, 2025 at 1:29 pm EDT

Question: So if I have a pendant mounted ceiling device using 3/4" conduit( RMC or EMT) and need a blank cover for the conduit to enter into to what covers exist that would have a hole for either threaded conduit or a compression connector? 4-11/16" box. Thanks

You're on the right track. Here's a breakdown of cover options for a 4-11/16" box with a pendant mounted ceiling device using 3/4" conduit (RMC or EMT), focusing on covers with a hole for threaded conduit or a compression connector

1. Specific Covers Designed for Pendant Mounting & Conduit Entry:
Pendant Cover with KO (Knockout)

This is the ideal solution if you haven't already installed the conduit.


Description

These covers are specifically designed for pendant mounting and have a knockout that matches your conduit size (3/4"). You simply knock out the appropriate size hole and thread the conduit into the cover (if using RMC). For EMT, you'd use a compression connector to connect the EMT to the cover.

Key Features

Pre-punched or knockout for standard conduit sizes. May have a central hole for the pendant mounting stem. Provides a clean and secure connection point. May be gasketed for weather resistance (if needed).

Considerations

Ensure the knockout size matches your 3/4" conduit size. Material: Steel is common for conduit. Consider aluminum if corrosion is a concern.

2. Adapting a Standard Blank Cover



Blank Cover + Hole Saw/Punch

This is a viable option if you can't easily find a dedicated pendant cover with a KO.


Description

Start with a standard 4-11/16" blank cover (steel or aluminum). Carefully drill or punch a 3/4" hole in the center or desired location of the cover. Then, use appropriate connectors (threaded fitting for RMC, compression connector for EMT).

Key Features

Provides maximum flexibility in hole placement. Blank covers are readily available.

Considerations

Requires precision drilling or punching for a clean, burr-free hole. Use a hole saw or punch designed for metal. Deburr the hole after cutting to prevent damage to wiring.

Important

Use a grounding bushing on the inside of the box where the conduit enters for RMC. This protects conductors from abrasion and provides a path to ground.

3. Combination Covers



Combination Device Cover with Conduit Entry

These are less common for direct pendant mounting but might work depending on your specific fixture. They have a standard device opening (for a receptacle or switch)
and a knockout for conduit entry. You'd cover the device opening with a blank insert if not needed.

Important Considerations for Selection and Installation



Material Compatibility

If using RMC (steel), a steel cover is typically used. Aluminum covers are fine with steel conduit as well, but avoid mixing aluminum conduit with steel covers or boxes unless using compatible fittings designed for dissimilar metals.

Grounding



This is crucial!
If using RMC, use a grounding bushing at the point where the conduit enters the box. The bushing has a lug for connecting a grounding wire. For EMT, the EMT connector will need to be listed for grounding. Environmental Rating

If the location is damp or wet, choose a cover and connector that are rated for that environment (e.g., NEMA 3R or higher). Use a gasketed cover.

Code Compliance

Always follow all applicable electrical codes (NEC or local codes). Pay close attention to grounding requirements, box fill calculations, and proper support of the pendant and conduit.


Box Fill

Make sure the number of conductors and devices in the 4-11/16" box doesn't exceed the allowable box fill.

Where to Find These Covers



Electrical Supply Houses

This is the best place. They will have a variety of covers, connectors, and knowledgeable staff.


Hardware Stores (Home Depot, Lowe's, etc.)

They will have some basic covers and connectors, but the selection might be limited.*

Online Retailers (Amazon, etc.)

Convenient, but make sure you're buying from a reputable seller and that the products are UL-listed or otherwise approved for your application.

How to Choose


Assess the Environment

Is it a dry, damp, or wet location?2.

Determine Conduit Type

RMC or EMT?3.

Pendant Mounting Method

How does the pendant attach to the cover? Does it need a center hole?4.

Code Compliance

Ensure the chosen cover and installation method meet all applicable codes.5.

Ease of Installation:
Consider your skill level and the tools you have available. Using a cover with a pre-punched KO is usually easier than drilling a hole.By carefully considering these factors, you can select the appropriate cover for your pendant-mounted ceiling device and ensure a safe and code-compliant installation. Flag for review

Previous Question Next Question