Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 2" Fixture Box?

User: 1.21 Gigawatts, Location: Norwalk, CT

Asked on: Friday, August 29, 2025 at 3:26 pm EDT
Answered on: Wednesday, September 3, 2025 at 1:32 pm EDT

Question: Need to pick your brains... Customer bought some fixtures from Japan or somewhere, no name brand.Anyway.. the base is only 2.3" so not even a 3" pancake would work. Do they make a 2" box? Im waiting for a callback from supply house. Wondering if you had any other ideas.No brackets came with it. Just some wall anchors and screws. Do they expect the splice to be inside the wall? SMHHe got the 80cm one. The 100cm would work since its 10cm (3.93")

Okay, let's break this down. You've got a non-standard fixture with a very small base (2.3") and need to figure out how to safely and code-compliantly mount it and make your electrical connections. Here's a thought process and some possible solutions

The Problem: Tiny Fixture Base, No Mounting Hardware, and Safe Wiring Practices
Small Base

2.3" is incredibly limiting for mounting a standard electrical box.


No Mounting Hardware

Suggests a cost-cutting measure by the manufacturer, or perhaps an assumption that installation will be different depending on the wall type.

Wall Anchors & Screws Only

This is a red flag. Wall anchors
alone are not a substitute for a proper electrical box, especially for a fixture that needs to have a secure connection for the electrical wiring.

Internal Splice Concern

You're right to be worried about burying the electrical splice inside the wall. That's generally against code in most jurisdictions (NEC in the US, CEC in Canada, etc.). Electrical splices must be contained within an approved enclosure (i.e., an electrical box).

Immediate Actions and Questions


Supply House Call

Great that you've already called your supply house. They are the best resource for what's readily available and code-compliant in your area. Press them hard on options. Don't just accept a "no" – ask what alternatives they suggest.2.

Manufacturer Documentation (If Possible)

Is there any documentation with the fixture? A website, instruction manual, even a poorly translated one might give you a clue about the intended mounting method.3.

Picture of the Fixture Base

A picture would be extremely helpful. Are there knockouts? Are there threaded holes? How is it intended to attach to the wall? Knowing what you are dealing with will lead to better solution.

Possible Solutions (in order of preference/safety)


The "Ideal" Solution (If Possible) - Get the 100cm fixture

You said the 100cm fixture has a 3.93" base (10cm).

This would be the best solution.
That gives you just enough room for a standard 4" round pancake box. Explain the problem to the customer, emphasize the safety concerns, and see if they're willing to exchange the 80cm one for the 100cm one. This will be the safest and most code-compliant method.2. Pancake Box Modification (Proceed with Caution - Check Local Codes)



Smallest Pancake Box

Ask your supply house about the
absolute smallest pancake box available. There might be a very thin one, even if it's not a standard product.

Careful Modification (If Allowed)

If you can find a pancake box that's close, you might be able to carefully modify it (e.g., shave off some plastic from the edge, if it's a plastic box) without compromising its structural integrity or reducing the interior volume below what is code-required.

THIS IS RISKY AND REQUIRES CAREFUL JUDGMENT and code confirmation.
You absolutely cannot compromise the box's ability to contain a fault. Important

The box
must fully enclose the wires and connections. You can't leave any bare wire or wire nuts exposed. The box must be securely mounted.3.

Surface-Mount Wiring (If Aesthetically Acceptable)



Small Surface-Mount Box

Find a very small surface-mount box. These are designed to be mounted on the wall, not in the wall.

Surface-Mount Conduit/Raceway

Run the wiring from your power source
on the surface of the wall in conduit or wire raceway (like Wiremold). This leads directly into the surface-mount box behind the fixture.

Pros

Keeps everything visible and accessible, generally easier to install.

Cons

The aesthetics are often not desirable.


Important

Use the smallest diameter wire raceway (like Wiremold) to reduce its appearance.4.

Recessed Fixture Mounting Plate (Custom Solution)



Fabricate a Metal Plate

Have a metal shop (or carefully make one yourself if you have the skills and tools) a mounting plate from steel. This would be a larger plate that mounts
onto the wall using screws and anchors.

Recessed Area

Create a recessed area in the plate behind where the fixture will mount. This recessed area is where you will place a small junction box.

Mount the Fixture to the Plate

Mount the fixture to the
front of the plate, concealing the junction box behind it.

Important

The metal plate must be securely grounded. The recessed area must be large enough to house an approved junction box. This is a custom solution and requires skill and precision.5.

Using a deeper wall anchors

If you really can't do any of the above, you may have to remove some of the drywall and go deeper into the wall. Install a 2x4 sideways between the studs to give yourself something sturdy to screw into.

What NOT to Do



Bury the Splice in the Wall

This is a code violation and a safety hazard.

Rely Only on Wall Anchors for Electrical Connection

The fixture needs a solid, grounded connection via an electrical box. Wall anchors are for
mechanical support, not electrical safety.

Ignore Code

Electrical codes are there for a reason. They protect people and property.

Try to "Make It Work" Without a Proper Enclosure

This is tempting in a situation like this, but it's not worth the risk.

Code Considerations



Box Fill

The electrical box you use must have enough volume to accommodate the number of wires, devices (like wire connectors), and fixture wires entering the box. There are code-defined rules for calculating box fill. Your supply house can help you with this.

Grounding

The metal parts of the fixture
must be properly grounded to the electrical system. This usually involves connecting a ground wire to the fixture's ground screw and connecting that ground wire back to the ground wire in the electrical box.

Wiring Methods

The wiring method you use (e.g., Romex, conduit) must be appropriate for the location and installation.

Recommendation

The best approach is to

strongly recommend that the customer exchange the 80cm fixture for the 100cm fixture.
This will provide a much safer and code-compliant installation. If that is not possible, carefully evaluate the other options, paying close attention to code requirements and safety. When in doubt, consult with a qualified electrician and your local building inspector. They can provide specific guidance based on your local codes and the specific situation. Flag for review

Previous Question Next Question