Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Duct bank installation quote.

User: Local101, Location: Florida

Asked on: Tuesday, September 2, 2025 at 12:55 pm EDT
Answered on: Wednesday, September 3, 2025 at 1:39 pm EDT

Question: Hello, I’m gonna be doing an electrical duct bank with no wire involved. Material all included. 10-4” sch40 10’ sections 100’ length. Depth of trench4’ 8” soil type (sand) just the earth work , compaction,and conduit install with spacers every 5’ no concrete in casement. Looking for some opinions on quoting this. Thank you

Okay, let's break down the factors involved in pricing out this electrical duct bank project. Since you're providing the materials, we'll focus on the labor and equipment needed for the excavation, conduit installation, and compaction.

Here's a breakdown of the cost considerations



1. Excavation



Volume

You need to excavate a trench 100 feet long and 4' 8" deep. We need to estimate the width of the trench. Since you have 10 conduits, let's assume a trench width of 2 feet to accommodate the conduits and allow for working space.
Trench Volume: 100 ft (length) x 2 ft (width) x 4.67 ft (depth) = 934 cubic feet. Convert to cubic yards: 934 cu ft / 27 cu ft/cu yd = 34.6 cubic yards.

Soil Type (Sand)

Sand is generally easy to excavate but can be unstable. This might require shoring or sloping the trench sides to prevent collapse, especially at that depth. This adds to the labor and potentially material costs.


Equipment

You'll likely need an excavator (or a backhoe for smaller jobs), possibly a small dozer for backfilling, and potentially a skid steer loader for moving material.

Labor

You'll need an equipment operator and likely at least one laborer for spotting utilities, ensuring proper depth, and general assistance. Shoring will need additional workers.


Disposal/Stockpiling

Where will the excavated sand go? Is it suitable for backfill, or will you need to haul it away and bring in select fill? Hauling costs can be significant.

2. Conduit Installation



Conduit Spacers

You're using spacers every 5 feet along the 100-foot run. This means you'll need approximately 20 spacers to keep the conduits aligned and separated. You'll need extra workers to maintain the level and spacing.


Labor

This is the most significant cost here. You'll need a minimum of two electricians or experienced laborers to lay the conduit, install the spacers properly, and ensure correct alignment and depth.

Handling 10 sections of 4” SCH40

This conduit is lightweight however will add time to maneuver and install these sections into a trench with spacers .

3. Compaction



Equipment

You'll need a plate compactor (or a "jumping jack" compactor for smaller trenches) to compact the backfill in lifts. A larger roller compactor might be necessary depending on local regulations and the required compaction level.

Labor

The compactor operator is typically one person, but a laborer will also be needed to spread and level the backfill material.


Backfill Material

Is the excavated sand suitable for backfill? If so, that simplifies things. If not, you'll need to import suitable backfill (e.g., compacted granular fill).

4. Permits and Inspections



Permit Costs

Research and include any required permits for excavation and conduit installation. Call your local permitting office.


Inspection Costs

Factor in time for inspections to ensure the installation meets code and specifications.

5. General Considerations



Site Access

Is the site easily accessible for equipment and material delivery? Difficult access increases costs.


Underground Utilities

Dial 811 to have underground utilities marked before digging! Hitting a utility line is incredibly costly and dangerous.

Weather

Consider the potential for weather delays (rain, extreme heat). Include a contingency in your pricing.


Safety

Safety is paramount. Factor in costs for trench shoring/sloping, PPE (Personal Protective Equipment), and regular safety meetings.

Overhead and Profit

Don't forget to add your company's overhead costs (insurance, vehicle expenses, office expenses) and a reasonable profit margin.

Steps to Estimate the Price


Labor Hours

This is the trickiest part. Estimate the hours required for each task:
Excavation: How long will it take to excavate 34.6 cubic yards of sand? (Consider equipment size, soil conditions, and site access). Conduit Installation: How many hours to lay 100 feet of conduit, installing spacers every 5 feet? (Consider the experience of your crew). Compaction: How many hours to backfill and compact the trench in lifts? (This depends on the type of compactor used).2.

Labor Rates

Know your hourly labor rates (including wages, benefits, and taxes) for each type of worker (equipment operator, electrician, laborer).3.

Equipment Rental

Get quotes for equipment rental (excavator, compactor, etc.) for the duration of the project. Factor in transportation costs for the equipment.4.

Material Costs (Aside from Conduit)

Shoring/Sloping Materials: If needed, get pricing for lumber, trench boxes, or other shoring materials. Backfill Material: If you need to import backfill, get a delivered price per cubic yard.5.

Permit Costs

Get actual permit fee information from the local permitting office.6.

Contingency

Add a contingency (typically 5-10%) to cover unexpected issues.

Example Calculation (Illustrative - You Need to Refine These Numbers)



Excavation

Excavation Time: 8 hours (estimate) Equipment Operator: 8 hours x $75/hour = $600 Laborer: 8 hours x $50/hour = $400 Excavator Rental: 8 hours x $200/day = $200 Disposal (Assume On Site Backfill):$0

Conduit Installation

Installation Time: 16 hours (estimate – 2 workers) Electrician/Laborer: 16 hours x $75/hour x 2 workers = $2400 Spacer Material:$200

Compaction

Compaction Time: 8 hours (estimate) Equipment Operator: 8 hours x $75/hour = $600 Laborer: 8 hours x $50/hour = $400 Compactor Rental: 8 hours x $100/day = $100

Permits

$150 (example)

Contingency (10%)

$465


Overhead (10%)

$465

Profit (10%)

$465

Total Estimated Cost

$5445

Important Considerations for Your Quote



Clarity

Be very clear in your quote about what is included (excavation, conduit installation, compaction) and what is not included (materials, concrete encasement, wire pulling, hauling away excavated material if not suitable for backfill).

Assumptions

State your assumptions (e.g., "Assumes excavated sand is suitable for backfill," "Assumes clear and unobstructed site access").


Exclusions

Clearly list any exclusions (e.g., "Does not include shoring or sloping of trench sides unless specifically requested").

Change Orders

State that any changes to the scope of work will result in a change order and additional costs.


Payment Terms:
Outline your payment terms (e.g., 50% upfront, 50% upon completion).By carefully considering all these factors and getting accurate pricing for labor, equipment, and materials, you can create a competitive and profitable quote for this electrical duct bank project. Good luck! Flag for review

Previous Question Next Question