Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: AFCI, GFCI, AFCI/GFCI circuit breakers

User: Greg1707, Location: Alexandria, VA

Asked on: Wednesday, September 3, 2025 at 8:17 pm EDT
Answered on: Saturday, September 6, 2025 at 12:11 pm EDT

Question: Virginia adopted NEC 2000 in Janurary. I am now dealing with the new requirements for AFCI etc. There are requirements for AFCI. There are requirements for GFCI etc.Given the prices for all of these breakers are about the same, should I just put AFCI/GFCI breaker on all circuits requiring such protection?It would seem to make life easier?

You're thinking about the right things as you transition to NEC 2020 in Virginia. It's smart to consider the long-term implications of your choices.Here's a breakdown of your situation and a recommendation on whether to use AFCI/GFCI combo breakers on all applicable circuits

Understanding the Requirements (General - Consult the Actual Code):
AFCI (Arc-Fault Circuit Interrupters)

NEC 2020 generally requires AFCI protection on all 120V, 15A and 20A branch circuits supplying outlets or devices installed in dwelling units' kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and similar rooms or areas. Note: Specific exceptions may exist.


GFCI (Ground-Fault Circuit Interrupters)

NEC 2020 mandates GFCI protection in various locations, including bathrooms, garages, outdoors, crawl spaces, unfinished basements, kitchens (countertop receptacles), laundry areas, and areas near wet locations. Again, specific exceptions exist.

Why Combination AFCI/GFCI Breakers Might Seem Appealing



Simplicity

One device handles both AFCI and GFCI protection, simplifying wiring and troubleshooting.


Space Savings

You only need one breaker space in the panel.

Potential for Future-Proofing

If future code revisions expand AFCI or GFCI requirements, you might already be covered.

Potential Drawbacks of Always Using Combination Breakers



Cost

While you mention the prices are similar, it's always good to double-check. Over the course of an entire house, even a small price difference can add up.

Overlapping Protection

In some locations, you might only
need GFCI or AFCI, not both. Using a combo breaker in those locations means you're paying for protection you don't technically require.

Troubleshooting Complexity

If a combo breaker trips, it can be harder to determine whether the fault is an arc fault or a ground fault. Some combo breakers have indicators to help with this, but it's still more complex than dealing with separate breakers.

Nuisance Tripping

Some argue that combo breakers are
slightly more prone to nuisance tripping, although this is becoming less of an issue with improved technology.

Recommendation

Generally, using combination AFCI/GFCI breakers

where
both AFCI and GFCI protection are required by code is a good practice.
It simplifies the installation and provides comprehensive protection.However, do not automatically use them everywhere.

Here's a more nuanced approach:1. Strictly Adhere to the NEC 2020 (as adopted by Virginia)

Carefully review the code to determine precisely where AFCI and GFCI protection are mandated in each area of the dwelling. Do NOT rely solely on memory or general impressions. Use the code book itself.2.

Locations Requiring
Both AFCI and GFCI

For example, a kitchen countertop receptacle within 6 feet of a sink might require both.

Use the combination AFCI/GFCI breaker here.
3. Locations Requiring Only AFCI

For example, bedrooms often require AFCI protection, but not necessarily GFCI.

Use a standard AFCI breaker here.
4. Locations Requiring Only GFCI

For example, a bathroom receptacle.

Use a standard GFCI breaker here.
5. Cost Analysis

Get accurate pricing for standard AFCI breakers, standard GFCI breakers, and combination AFCI/GFCI breakers from your supplier. Calculate the total cost for each approach (using all combos vs. using a mix).6.

Long-Term Considerations

Factor in potential future code changes. If you believe AFCI or GFCI requirements are likely to expand significantly in the future, using combo breakers
more liberally might be a reasonable strategy, even if it costs a bit more upfront.

Important Considerations



Consult with a Qualified Electrician

The NEC can be complex, and local interpretations can vary. Always consult with a licensed and experienced electrician in Virginia to ensure your installations comply with all applicable codes and regulations. They can also provide valuable insights into local practices and preferences.

Manufacturer's Instructions

Always follow the manufacturer's instructions for installing and wiring AFCI, GFCI, and combination breakers.


Testing

After installation, thoroughly test all AFCI and GFCI breakers to ensure they are functioning correctly.

In summary: A strategic mix of standard AFCI, standard GFCI, and combination AFCI/GFCI breakers, based on the specific code requirements for each location, is usually the most cost-effective and practical approach.
Using combo breakers only where both protections are required strikes a good balance between cost, convenience, and code compliance. Always prioritize safety and compliance with the latest electrical codes. Flag for review

Previous Question Next Question