User: 1.21 Gigawatts, Location: Norwalk, CT
Asked on: Monday, September 8, 2025 at 2:49 pm EDT
Answered on: Monday, September 8, 2025 at 2:49 pm EDT
Question: Would you guys, or do we need to, protect the romex from being against the steel pole? I feel like just in case I should put something behind it.Would cardboard be ok or would moisture be a potential issue?
Yes, you should protect the Romex from direct contact with the steel pole. Direct contact with metal edges or surfaces can damage the Romex sheathing over time due to vibration, movement, or even galvanic corrosion. Damaged sheathing exposes the wires inside, creating a potential electrical hazard.Here's a breakdown and options for protection
Why you need to protect it:
Abrasion
Steel can have sharp edges or burrs that can rub against the Romex sheathing, eventually wearing it down.
Vibration
Vibrations in the structure can cause the Romex to rub against the steel.
Galvanic Corrosion
While less likely than abrasion, dissimilar metals (copper in the Romex and steel) in the presence of moisture can create a small electrical current, leading to corrosion of one or both metals.
Building Codes
Electrical codes often require protecting cables from physical damage.
What to use for protection (best to worst)
Cable Staples or Straps with a Spacer
This is often the best and easiest method. Use insulated cable staples or straps designed for Romex. Install them in a way that the cable is slightly spaced away from the steel, not directly pressed against it. You can also use a spacer.2.
Grommet or Edge Protector
If the Romex passes through a hole in the steel, a rubber or plastic grommet or edge protector is essential to prevent the sharp edges of the hole from damaging the cable.3.
Plastic Wire Loom or Conduit
If you need robust protection or are running the Romex along the pole for a longer distance, encasing it in a length of flexible plastic wire loom or PVC conduit is a good option. Secure the loom or conduit to the pole with appropriate clamps.4.
Electrical Tape
While not ideal for long-term protection against sharp edges, multiple layers of high-quality electrical tape wrapped around the Romex where it contacts the steel can provide some cushioning and insulation. Use this as a temporary solution or in conjunction with another method.5.
Other approved methods
Some other methods include running the wire through a properly installed junction box, conduit body or fitting.
Why cardboard is NOT a good choice
Moisture Absorption
Cardboard readily absorbs moisture, which can lead to mold growth and accelerate corrosion of the steel. It can also degrade the Romex sheathing over time.
Flammability
Cardboard is flammable. While Romex is rated for certain temperatures, you don't want to introduce a fire hazard.*
Degradation
Cardboard breaks down over time, especially in damp or humid environments.
In summary:
Do protect the Romex. Avoid cardboard. Use insulated staples/straps with a spacer, a grommet (if going through a hole), wire loom/conduit or multiple layers of electrical tape (but preferably in conjunction with another method) to provide proper protection. Consider local electrical codes for the best and safest practices. Flag for review