User: ING23, Location: Las Vegas
Asked on: Wednesday, September 10, 2025 at 10:02 pm EDT
Answered on: Wednesday, September 10, 2025 at 10:02 pm EDT
Question: This Panel originally came with 200A main breaker is a Siemens MC2040B1200EFC . I am looking for a 175A Main breaker but I am having a hard time with this 4 pole Breaker label EQ9985 equivalent to 200A. Any one knows , if exist , a 4 pole 175A main breaker for this panel?
You are correct that the Siemens MC2040B1200EFC is a 200A main breaker panel. And the EQ9985 cross-references to the 200A main breaker for that panel.Here's the breakdown of why finding a 175A 4-pole breaker specifically FOR that panel might be difficult, and what you need to consider: 4-Pole Breakers are Uncommon in Residential Panels
4-pole breakers are typically used in commercial or industrial applications that require 3-phase power plus a neutral (common in 480/277V systems, for example). Residential panels are overwhelmingly 2-pole (240V) or single-pole (120V).
Panel Compatibility is Crucial
You can't just stick any breaker into any panel. Breakers must be specifically designed and UL-listed to work with a particular manufacturer's panel series.
Why a 175A Main is Uncommon
Main breakers are usually sized at standard increments (100A, 125A, 150A, 200A, 225A, etc.). A 175A main isn't a standard size, making it much harder to find.
Here's what you need to do to determine if a 175A breaker exists for this panel
Contact Siemens Directly
This is the most reliable method. Go to the Siemens website (industry.usa.siemens.com) or call their technical support line. Provide them with the exact model number of your panel (MC2040B1200EFC). Ask them: "Is there a 175A main breaker that is UL-listed and approved for use in this MC2040B1200EFC panel?" "If so, what is the Siemens part number for that 175A breaker?"2.
Check the Panel Label/Diagram
Inside the panel door, there should be a label or diagram that lists the acceptable breaker types for that panel. Sometimes, manufacturers will list all approved breaker amperages. Look for the Siemens breaker type (e.g., QP, QPx, QS, etc.) approved for the main breaker location. The label might indicate acceptable amperage ranges or specific part numbers.3.
Consult a Qualified Electrician
This is highly recommended. Changing the main breaker is a serious electrical task that should only be done by a licensed electrician. They can: Assess your electrical load requirements to determine if a 175A breaker is even appropriate (or if you need something larger or smaller). Determine if there is a 175A breaker that is compatible and safe to install in your panel. Perform the installation safely and according to code.
Why you might be looking for a 175A Breaker
Downsizing for specific load requirements
Maybe your service entrance is rated at 175A and you are trying to match it.
Code compliance
There are cases where a load calculation determines that the service does not require a 200A.
Important Considerations
Do not install a breaker that is not specifically approved for your panel. Using an unapproved breaker can create a fire hazard and void any warranties. Changing the main breaker does NOT change the service entrance rating of your home. If your service entrance cable and meter are rated for 200A, replacing the main breaker with a 175A breaker will not change that.* Any electrical work should be done by a qualified and licensed electrician. Working with electricity can be dangerous.In summary, start by contacting Siemens and checking the panel label. Then, consult with a qualified electrician before making any changes to your main breaker. They can ensure the right breaker is selected and installed safely. Flag for review