Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 20% Fill in a Trough Right?

User: Joethemechanic, Location: Hazleton Pa

Asked on: Thursday, September 11, 2025 at 1:43 pm EDT
Answered on: Thursday, September 11, 2025 at 1:43 pm EDT

Question: I took the 3/4 plywood cover someone put on years ago off to use for a pattern to make a new steel cover and discovered another project. What if I fabricate a steel cover with additional space? Or just bite the bullet and replace it with a larger trough?

Okay, you've opened Pandora's Box! Let's break down the decision-making process for whether to fabricate a larger steel cover or replace the entire trough

Understanding the Situation
Why was the plywood cover there in the first place? Was it a temporary fix? Was the original cover damaged? Understanding the history helps. What is the trough used for? This is crucial. Is it for drainage, cable routing, some other utility? What flows through it/in it can help determine whether or not more space is needed. What's "additional space" for? What do you hope to achieve by increasing the cover's volume? This is the driving question. What's the condition of the existing trough? Is it rusting, cracked, or otherwise deteriorating? What are the dimensions of the existing trough and cover?Pros and Cons of Fabricating a Larger Steel Cover Pros



Potentially Cheaper

May be less expensive than replacing the entire trough, especially if you have the skills/tools to fabricate it yourself.


Faster

Potentially quicker than a full replacement, especially if you don't have to dig up or disrupt the surrounding area.

Customization

You can tailor the cover to your exact needs (height, width, access points, etc.).


Less Mess

Avoids the mess and disruption of removing and replacing a trough.

Avoids potential structural disruption

When you increase the size of the trough, you may have to worry about the structure of the building or ground that the trough is set in/on.


Cons



May Be A Band-Aid

If the underlying issue is a need for a larger
trough (increased flow, more cables, etc.), the cover only provides temporary relief.

Appearance

A larger cover might look out of place or ungainly if not well-designed.

Weight

A larger steel cover will be heavier, making it harder to handle and potentially requiring stronger supports.


Complexity

Designing and fabricating a structurally sound, weather-resistant, and safe larger cover requires skill and effort.

Hidden Problems

You're not addressing any potential problems with the
trough itself (rust, cracks, etc.).

May not solve the problem completely

Increasing the size of the cover isn't going to solve issues of volume/ flow.

Pros and Cons of Replacing the Entire Trough with a Larger One
Pros



Addresses Root Cause

Provides more capacity if that's the underlying need.

Long-Term Solution

Replaces a potentially aging or damaged trough with a new one.


Clean Slate

Opportunity to improve drainage, cable routing, or whatever the trough is used for.

Better Aesthetics

A properly sized and installed trough can look more professional and integrated.


Safety

The new trough will be up to standards and eliminate potential hazards.

Cons



More Expensive

Significantly higher cost of materials and labor.

More Time-Consuming

Requires more time for excavation, installation, and potential cleanup.


More Disruptive

May require excavation, potentially disrupting the surrounding area.

Potential for Unexpected Issues

You might uncover hidden problems during excavation (buried utilities, structural issues).


Permitting/Codes

You may need permits for replacement, especially if it affects drainage or other regulated aspects.

Decision-Making Process
1. Define the Problem

Why do you want more space? Is it to accommodate increased flow of water/other liquids? Is it to add more cables or utilities? Is it simply to make it easier to access the existing contents?2.

Assess the Existing Trough

Is it in good condition? Is it the right size for its current function (even without expansion)? Is it easily accessible for replacement?3.

Cost Comparison

Get quotes for a larger trough installation (materials, labor, potential permits). Estimate the cost of materials and your time for fabricating a larger cover.4.

Consider the Long-Term

Will the increased space be sufficient for future needs? Will the existing trough continue to function reliably for the foreseeable future?5.

Evaluate the Aesthetics

Will the larger cover look acceptable? Will a new trough blend in better with the surroundings?6.

Consider your Skillset

Do you have the skills to fabricate a structurally sound cover that can withstand the elements and potential loads? Do you have the tools for cutting, welding, and finishing steel?

Specific Questions to Ask Yourself



If it's for drainage

Has the amount of water flowing into the trough increased? Is it backing up or overflowing? If so, a larger trough is likely needed.


If it's for cables

Are you planning to add more cables in the future? A larger trough may be warranted. Is it just cramped and difficult to work with the existing cables? A larger cover might be enough to provide better access.

Is the trough easily accessible?
If the trough is in a difficult location to get equipment to, a larger cover may be the only option.

Recommendation



If the existing trough is undersized for its current function, or if you anticipate a significant increase in flow/capacity, replace the entire trough.
This is the more robust and long-term solution. If the existing trough is adequate, but you just need more access or a little more room for future expansion, fabricating a larger cover might be a viable option. Be sure to design it carefully for structural integrity and weather resistance. If the existing trough is in poor condition (rusted, cracked), replace it regardless of whether you increase the size.

Good luck with your project! Take your time, evaluate all the factors, and choose the solution that best fits your needs and budget. Flag for review

Previous Question Next Question