Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 855 bender

User: 618electrician, Location: St. Louis

Asked on: Saturday, September 13, 2025 at 11:58 pm EDT
Answered on: Saturday, September 13, 2025 at 11:58 pm EDT

Question: Will the motor on a 855 smart bender 115 v dc run on 160 v dc ?????????????????????????????????????????????????????????????????????????????????

Probably Not, and Definitely Not Safely

Here's why: Overvoltage Damage

Applying a significantly higher voltage (160V vs 115V) to a DC motor will likely cause insulation breakdown in the motor windings, leading to short circuits and permanent damage.


Overheating

Even if the motor doesn't immediately fail, the increased voltage will force significantly higher current through the motor. This will lead to excessive heat generation, potentially melting insulation, warping components, and causing premature failure.

Speed and Torque Issues

The motor's speed will increase, potentially beyond its design limits, leading to mechanical stress and damage. The torque characteristics will also be altered in an unpredictable and likely undesirable way.


Controller Damage

The motor controller (if present) is also designed for a specific voltage range. Applying a higher voltage can damage its components as well.

Safety Hazard

Overvoltage can create a fire hazard and present a shock risk.

In short, operating a 115V DC motor at 160V DC is extremely risky and likely to result in damage to the motor, the controller, and possibly create a safety hazard. Do not attempt this.
What to do instead


Use the correct voltage

The best option is to use a power supply that provides the motor's rated voltage (115V DC).2.

Use a DC-DC converter

If you only have a 160V DC source, you
might* be able to use a step-down DC-DC converter to reduce the voltage to 115V. However, you need to ensure the converter can handle the motor's current draw and any inrush current during startup. Choose a high-quality, reliable converter designed for motor applications.3.

Consult the manufacturer:
Contact the manufacturer of the 855 Smart Bender or the motor itself for specific recommendations and voltage tolerance information. They may have a solution or be able to advise on the best course of action. Flag for review

Previous Question Next Question