User: Fulthrotl, Location: HB, CA (19 Hrs. 22 Min. from Winged Horses)
Asked on: Tuesday, September 16, 2025 at 11:26 pm EDT
Answered on: Tuesday, September 16, 2025 at 11:27 pm EDT
Question: ok. i have a trailer with 700 watts of PV's from go power.4 large panels, 3 small panels. 1050 AH of lithium. 2KWinverter. all of it Go Power.well, i did have 700 watts. somewhere on 101 between pismo beach andhalf moon bay, one of the panels departed the trailer at about65 mph, shattering the one behind it with what looks like a cornerof the departing panel. so i'm down about 250 watts.it's a 12v. system. there is supposed to be a manufacturers warrantyon the trailer, which one would assume means parts don't fly off.if they don't honor that, and i have to replace them, am i stuck withGo Power for compatibility? they seem to want $2 a watt.
Okay, that's a rough situation! Losing panels at highway speed is definitely not ideal. Let's break down your options and address your compatibility concerns
1. Warranty Claim: Your Primary Focus
Document Everything
Take photos of the remaining damaged panel(s), the mounting hardware, and the spot where the panels were located. Get a police report, if possible (although unlikely they'll do much). Write down the date, time, and location (as accurately as you can remember) where you believe the panels detached.
Contact the Trailer Manufacturer IMMEDIATELY
This is your first and best course of action. Be polite but firm. Emphasize that panels detaching at highway speed is a serious safety issue and a clear failure of the trailer's structural integrity or the panel mounting system. Refer to the warranty documentation (find it if you haven't already). Ask for a clear process for filing a claim.
Document All Communication
Keep records (emails, notes from phone calls) of all contact with the manufacturer. This is crucial if you need to escalate the issue.
Expect Pushback
Be prepared for them to deny the claim or try to blame it on something else. Don't give up easily. Cite the safety hazard and the potential liability they face if other panels detach and cause an accident.
Consider the Mounting System
If the manufacturer claims it's not their responsibility because the panels are a "third-party" add-on, challenge that. The mounting system is part of the trailer's functionality and should be warrantied by them or by the panel manufacturer who they bought it from as a system.
2. Understanding Panel Compatibility (If Warranty Fails) Voltage Matters
You are not necessarily stuck with Go Power panels. The voltage and current (amps) are the critical factors for compatibility, not the brand. Your charge controller needs to be able to handle the combined voltage and current from all panels.
12V System Complexity
A true "12V system" is less common with modern RV solar setups, because the panels typically output a higher voltage that gets regulated down by the charge controller. What's likely is you have a system designed to charge a 12v battery bank. To determine compatibility, you need to know the actual operating voltage (Vmp) and current (Imp) of your existing Go Power panels. This information is printed on a label on the back of each panel. You can also often find it in the Go Power product specifications online.
Series vs. Parallel
How your panels are wired together matters.
Series
Increases voltage, keeps current the same. If the panels are in series, the voltages add up, and the currents remain the same.
Parallel
Keeps voltage the same, increases current. If the panels are in parallel, the voltages remain the same, and the currents add up.
Charge Controller Limit
The most important component to consider is the charge controller. You need to find its specs (either on the unit itself or online). Pay close attention to:
Maximum PV Input Voltage (Voc)
This is the maximum open-circuit voltage the controller can handle. Make sure the sum of the Voc of your panels in series doesn't exceed this limit (even on a cold day, as voltage increases in cold weather).
Maximum PV Input Current (Isc)
This is the maximum short-circuit current it can handle. The sum of the Isc of panels in parallel should not exceed this limit.
Maximum Power (Watts)
This is the total wattage the charge controller can handle. The wattage (Vmp Imp) of all the panels should not exceed this limit.
Mixed Panels
Ideally, you want panels with the same voltage and current characteristics. However, you can mix panels, but it's less efficient. The weaker panel will limit the performance of the stronger panel in some wiring configurations. If you mix panels, put panels with the same or similar specifications in series, and then put series runs in parallel.
3. Replacement Options (Assuming Warranty Fails) Shop Around
Don't be locked into Go Power's pricing. $2/watt is high.
Check with Go Power
if you do have to replace with them, ask if there is any accommodation, due to the situation.
Look at Other Brands
Renogy, Rich Solar, HQST, and Newpowa are all popular and generally more affordable brands. Focus on finding panels with voltage/current characteristics similar to your existing Go Power panels.
Consider Used Panels
Used solar panels can be a very affordable option, especially if you can find them locally. Check local classifieds (Facebook Marketplace, Craigslist) and solar installers who might be removing older systems. Be very careful: test each used panel's voltage and current output before buying.
Slightly Different Wattage
Don't get hung up on needing exactly 250 watts to replace. As long as the voltage and current are compatible and the wattage is within the charge controller's limits, you can adjust slightly up or down.
Panel Size
you may want to consider the same size panels that you already have. This can keep the array uniform and possibly ease install on existing mounting structure.
4. Steps to Take Before Buying Replacements1. Identify Your Existing Panels
Locate the model number and voltage/current specs (Vmp, Imp, Voc, Isc) of your remaining Go Power panels. You can find this on the label on the back of the panel or online.2.
Find Your Charge Controller Specs
Identify the model number of your charge controller and find its specifications, especially the maximum PV input voltage (Voc), maximum PV input current (Isc), and maximum power (Watts).3.
Determine Your Wiring Configuration
Are your panels wired in series, parallel, or a combination of both? This will affect how you need to match the voltage and current of the replacement panel.4.
Calculate Compatibility
Once you know the specs of your existing panels and charge controller, you can determine what voltage/current ranges are acceptable for replacement panels.
Important Considerations
Professional Installation
If you're not comfortable working with electrical wiring, hire a qualified electrician or solar installer to help you replace the panels. Incorrect wiring can damage your system or create a safety hazard.
Grounding
Make sure all panels and the mounting system are properly grounded.*
Fuses/Circuit Breakers
Verify that your system has appropriate fuses or circuit breakers to protect against overcurrent.
In summary: Your primary goal should be to get the trailer manufacturer to honor the warranty. If that fails, don't despair! You have options for replacing the panels with compatible alternatives at a more reasonable price. Do your research, understand your system's voltage and current requirements, and don't be afraid to shop around. Good luck! Flag for review