Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: GFCI & PLC I/O

User: ptonsparky, Location: NE (9.06 miles @5.9 Degrees from Winged Horses)

Asked on: Friday, September 19, 2025 at 5:24 am EDT
Answered on: Friday, September 19, 2025 at 5:25 am EDT

Question: I don't install but I do some low-end PLC programming for an area EC as his employee. He took over some customers after I retired.The system in question ran for several weeks before it started odd behavior. The difference being dry weather that turned wet. A cord and plug connected control station had been extended via another cord connecter/cap. That connection had gotten wet and muddy. PLC inputs trigger easily.120-volt inputs. I made some logic changes and suggested to the customer he protect connections from the weather.Even though it is a twist lock receptacle I am of the thought that it needs to be GFCI protected.Yes/No?

Yes.Here's why: Wet Conditions

You've already identified that moisture is a factor in the system's malfunction. GFCI protection is specifically designed to trip when it detects a difference in current between the hot and neutral conductors, which often occurs when electricity leaks to ground through moisture.


PLC Inputs

The PLC inputs triggering easily are a clear indication of a potential ground fault. A GFCI would help prevent these spurious triggers by interrupting the power supply when leakage current is detected.

Personnel Safety

While twist-lock receptacles provide a secure connection and prevent accidental disconnection, they don't inherently provide ground fault protection. If someone were to come into contact with a live conductor or a fault current, a GFCI would trip quickly, potentially saving them from a severe shock.


Low-end PLC programming for an area EC as his employee:
You are working with an electrician as his employee. It is not your job to decide GFCI or not unless you are the electrician for the project. You should bring this up with your employer.It's important to note that GFCI protection is often required by code in wet or damp locations. Consulting the applicable electrical codes for your area is always recommended to ensure compliance and safety. Flag for review

Previous Question Next Question