User: Eddie702, Location: Western Massachusetts
Asked on: Friday, September 19, 2025 at 11:45 pm EDT
Answered on: Friday, September 19, 2025 at 11:46 pm EDT
Question: I generally buy the ones with the holes in them for mounting. I haven't seen any listed ones, and I guess they are supposed to be listed. Has any inspector ever questioned this? Looking online I haven't seen any listing.What are you using?I like using them for Romex especially in a spot that is difficult to use staples if you can't get a hammer in the right spot
You're talking about those plastic Romex wire supports, often called "Romex Saddles" or "Wire Clamps" with the screw holes for mounting. You're right to be thinking about listing and code compliance!Here's the breakdown and what to consider
Listing is Key (Usually)
The National Electrical Code (NEC) generally requires listed products. This means the item has been tested and certified by a recognized testing laboratory (like UL, ETL, CSA) to meet specific safety standards. The listing mark is your assurance that the product is suitable for its intended purpose.
Are They Required to be Listed? Yes, most of the ones that I know of must be listed. It would be really difficult to verify that the correct material would be used, as well as whether or not it is rated for the temperature and humidity in the area. The Code Says
NEC 300.4(D)
This section addresses protection from physical damage. While it doesn't explicitly mandate listed supports, it implies the need for durable protection that meets standards.
NEC 334.30
This section specifically covers securing and supporting NM cable (Romex). It mandates that NM cable be secured by staples, cable ties listed and identified for securing and supporting cables, straps, or similar fittings. This implies the need for listed items when using alternatives to staples.
The Problem with Unlisted Saddles
If a wire saddle/clamp isn't listed, it becomes difficult (or impossible) to prove it meets the code requirements for secure support and protection. Inspectors are well within their rights to question or reject unlisted products.
What Inspectors are looking for Proper support within required intervals Correctly sized fasteners No sharp edges that can damage the wires Material that can withstand the environment it is in Why Some People Use Unlisted Ones Anyway
You're right, convenience is a big factor. Especially in tight spots, those screw-in saddles can be a lifesaver. But convenience shouldn't outweigh safety and code compliance.
What to Use Instead (Listed Options)
Listed Romex Saddles/Clamps
Look specifically for saddles or clamps that do have a UL, ETL, or CSA listing mark on the packaging or the product itself. They're out there! Search for "listed romex support," "listed NM cable clamp," etc. The listing will usually have language saying "for use on NM cable".2.
Listed Cable Ties
If you need flexibility, use cable ties that are specifically listed and identified for supporting cables. They'll say so on the packaging. These are often UV-resistant if used outdoors and may be rated for plenum spaces if needed. You would have to screw the cable ties into a surface.3.
Listed Staples
While you mentioned the hammer issue, consider using an angled nailer to drive the staples into the studs in tight spots.4.
Other Listed Straps/Fittings
There are a variety of other listed straps and fittings designed for securing Romex. Check your electrical supply house.
What I Use
Staples Primarily
I generally prefer to use listed Romex staples, especially in accessible areas.
Listed Saddles/Clamps When Needed
When I'm in a tight spot or need extra security, I'll use listed Romex saddles or clamps that I can screw in.
Listed Cable Ties
When I need to use flexible support in an area that is difficult to staple.
Important Notes
Local Codes Always Rule
Check with your local electrical inspector or building department. They may have specific requirements or preferences. Some jurisdictions are stricter than others.*
Documentation is Helpful
If you're using something other than standard staples, keep the product packaging or documentation handy to show the inspector that it's listed and approved for the application.
In summary, while unlisted Romex saddles might seem convenient, they can lead to code violations. Always prioritize listed products to ensure safety and compliance. Flag for review