Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: VAV

User: Alwayslearningelec, Location: NJ

Asked on: Monday, September 22, 2025 at 2:12 pm EDT
Answered on: Monday, September 22, 2025 at 2:12 pm EDT

Question: All mechanical VAV's are NOT electrical, correct. I always reference mechanical schedule to check electrical data.

You are correct. Not all mechanical VAVs are electrical.

Here's why and how it relates to your statement: Mechanical VAVs (Pressure Independent or Dependent)

These VAVs operate using pneumatic or mechanical controls. They respond to changes in duct pressure to modulate the airflow, usually via a thermostat. They don't require electrical power for the actual damper operation. They are often referred to as "pneumatic VAVs."


Electrical VAVs

These VAVs use an electric actuator to control the damper position. They typically have a controller that receives a signal from a thermostat or building automation system (BAS) and adjusts the damper accordingly. They require electrical power for the actuator and controller.

Why you check the mechanical schedule

The mechanical schedule is crucial because it should specify the type of VAV box being used:

If the schedule indicates "pneumatic VAV" or mentions pneumatic tubing, or does not have electrical connection information, you know it's likely a mechanical VAV.
You'll be looking for pneumatic connections in the field. If the schedule lists electrical requirements (voltage, amperage, wiring details), it's an electrical VAV. You'll need to ensure the electrical connections are properly installed and powered.

Important Considerations



Pneumatic VAVs Still May Have Electrical Connections

While the damper operation itself might be mechanical, some pneumatic VAV systems have electrical connections for:
A zone thermostat that sends a pneumatic signal.

A central air compressor that provides the compressed air for the pneumatic system.


Sometimes the Mechanical Schedule is Lacking

It's not uncommon to find mechanical schedules that are incomplete or ambiguous. In these cases, you might need to: Consult the equipment submittals. Physically inspect the VAV box in the field. Contact the mechanical engineer or manufacturer for clarification.

In summary, you are right to check the mechanical schedule. However, don't rely solely on it. Cross-reference with submittals and field observations to confirm the type of VAV and its electrical requirements.
* Flag for review

Previous Question Next Question