Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Eaton giving up on the non-notched bus stabs

User: brycenesbitt, Location: United States

Asked on: Tuesday, September 23, 2025 at 2:01 am EDT
Answered on: Tuesday, September 23, 2025 at 2:02 am EDT

Question: I wanted to comment on an old thread:Eaton Giving up on Notching CTL Bus Bars?This is Eaton's current (September 2025) page on the notched stabs. Placed here for archival purposes:Eaton appears to have given up on notching bus stabs, and somewhat reduced the price of tandem breakers that are compatiblewith full (un-notched) bus stabs.=============================================================================https://knowledgehub.eaton.com/s/article/What-is-the-difference-between-the-BD-BQ-and-BQC-breakersQ: What is the difference between the BD, BQ and BQC breakers?A:BD – DuplexBQ – Quadplex (independent trip)BQC – Quadplex (common trip)The BD, BQ, and BQC circuit breakers are also known as CTL breakers and have a rejection tab on the bus connection side of the breaker to prevent them from used in certain areas of loadcenter. CTL stands for Circuit Total Limitation.These breakers are used in BR type CTL loadcenters. A circuit limiting loadcenter has notched bus stab so that only certain number of duplex/quadplex beakers can be installed into them. The BQ quadplex breakers feature the independent trip function where each circuit/pole trips independently of the other. The BQC breakers have a common trip feature where the center and/or outer poles will trip synchronously.CTL breakers are not compatible with non-CTL (current offering) loadcenters.The image below shows an example of the notched bus and how a CTL breaker with rejection tab can still be installed on that loadcenter.

Okay, I understand you want to add a comment to an old thread about Eaton's policy on notched CTL (Circuit Total Limitation) bus bars, referencing their current (September 2025) webpage on the topic. Here's a possible comment you could use, incorporating your information

Subject: Eaton Giving up on Notching CTL Bus Bars? (Update - Sept 2025)

It appears Eaton may have quietly moved away from actively notching bus stabs. Prices on tandem breakers compatible with full (un-notched) bus stabs have also come down, suggesting this direction.For archival purposes, here's a snippet from Eaton's Knowledge Hub page (accessed Sept 2025) that still discusses the CTL breakers and notched bus design:[Start Quote]=============================================================================https://knowledgehub.eaton.com/s/article/What-is-the-difference-between-the-BD-BQ-and-BQC-breakersQ: What is the difference between the BD, BQ and BQC breakers?A:BD – DuplexBQ – Quadplex (independent trip)BQC – Quadplex (common trip)The BD, BQ, and BQC circuit breakers are also known as CTL breakers and have a rejection tab on the bus connection side of the breaker to prevent them from used in certain areas of loadcenter. CTL stands for Circuit Total Limitation.These breakers are used in BR type CTL loadcenters. A circuit limiting loadcenter has notched bus stab so that only certain number of duplex/quadplex beakers can be installed into them. The BQ quadplex breakers feature the independent trip function where each circuit/pole trips independently of the other. The BQC breakers have a common trip feature where the center and/or outer poles will trip synchronously.CTL breakers are not compatible with non-CTL (current offering) loadcenters.The image below shows an example of the notched bus and how a CTL breaker with rejection tab can still be installed on that loadcenter.=============================================================================[End Quote]Important Considerations for your actual post



Verify the URL

Double-check the Eaton Knowledge Hub URL is still valid in September 2025, and that the content is exactly as you've quoted it. Websites change, and you want your archived info to be accurate.

Add a Call to Action (Optional)

You could add something like: "Has anyone else noticed this trend?", or "Interested to hear if others have seen this impacting new installations." This encourages discussion.

Be Prepared for Pushback

Bringing up potentially outdated info can get you some pointed replies. Be ready to explain your reasoning for posting (archival and observation of a possible change in policy).


Check Thread Rules

Make sure the forum/discussion board allows bumping old threads. Some have rules against this.

Avoid Speculation

While you can
suggest a trend, avoid stating definitive conclusions about Eaton's future plans unless you have concrete evidence. Stick to observable facts (the price change, the persistent but possibly outdated documentation).

Formatting:
Use the forum's formatting tools appropriately (bold, italics, code blocks) to make your post readable.This will make your comment informative, archival, and likely spark further discussion (if the forum allows it). Good luck! Flag for review

Previous Question Next Question