Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: power loss question

User: teeg123, Location: Maine

Asked on: Wednesday, September 24, 2025 at 11:32 am EDT
Answered on: Wednesday, September 24, 2025 at 11:35 am EDT

Question: I have been trying to figure this out and have yet to get it.what is power lost in R2- R1 ----- R2-------R320ohms 10ohms 20ohmsvoltage supplied 60 volts DCthe answer is 12 watts but I'll be darned if I can get that answer.......power to R1 = v2/R =60*60/20= 3600/20=180power to R2 360power to R3 180and this is where I get stuck, I'm sure i missed something and feel silly asking this question.to be clear I rarely have to do any of this kind of calculations at my job. any help or guidance is appreciated.

Okay, let's break down this problem step-by-step. You're on the right track, but you're calculating the power as if each resistor had the full 60V across it. Since they are in series, the voltage will divide across them.1. Find the Total Resistance (R_total)

Since the resistors are in series, the total resistance is the sum of the individual resistances: R_total = R1 + R2 + R3 = 20 ohms + 10 ohms + 20 ohms = 50 ohms

2. Find the Total Current (I_total)

Use Ohm's Law (V = IR) to find the total current flowing through the circuit: I_total = V / R_total = 60 volts / 50 ohms = 1.2 amps

3. Find the Voltage Drop Across R2 (V_R2)

Again, use Ohm's Law, but this time apply it only to R2, using the total current we just calculated: V_R2 = I_total R2 = 1.2 amps 10 ohms = 12 volts

4. Calculate the Power Dissipated by R2 (P_R2)

Now you can use the power formula: P = V^2 / R or P = I^2 R or P=VI. Since you know the voltage across R2 and the resistance of R2, the easiest is: P_R2 = V_R2^2 / R2 = (12 volts)^2 / 10 ohms = 144 / 10 = 14.4 watts

Important Considerations and Why Your Original Approach Was Incorrect



Series Circuits

In a series circuit, the current is the same through all components. The voltage is divided across the components.

Voltage Division

You can't assume each resistor has the full 60V across it. The voltage drops across each resistor proportionally to its resistance.


Power Calculations

When calculating power for an individual resistor in a series circuit, you must use the voltage drop across that specific resistor and the current through that specific resistor (which is the total current in a series circuit).

In Summary:


The power lost in R2 is 14.4 watts.I hope this helps clarify the process! Let me know if you have any further questions. Flag for review

Previous Question Next Question