Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Is this allowed by the NEC and what codes are against it?

User: liqababy, Location: Belize

Asked on: Wednesday, September 24, 2025 at 3:30 pm EDT
Answered on: Wednesday, September 24, 2025 at 3:30 pm EDT

Question: I have the following installation with the PVC cloating there across to the building. I am trying to find out if there are any NEC codes against this installation. To me it just doesn't seem right but i tried searching and can't find a specific thing that would eliminate it. Anyone willing to help??

Okay, I understand. You have PVC conduit running across to a building, and you're concerned about whether it meets NEC requirements. You're right to question it; unsupported or improperly supported PVC conduit can be a problem.Here's a breakdown of the NEC concerns and what to look for, along with some potential code sections

Key Concerns and Relevant NEC Articles

1. Support



NEC 352.30 (Securing and Supporting)

This is the big one. It dictates how often PVC conduit must be supported. The spacing depends on the size of the conduit. Here's a quick summary (always refer to the actual code for the latest requirements):


1/2" - 1"

Maximum 3 feet between supports.

1 1/4" - 2"

Maximum 5 feet between supports.


2 1/2" - 3"

Maximum 6 feet between supports.

3 1/2" - 5"

Maximum 7 feet between supports.


6"

Maximum 8 feet between supports.

What to look for

Is the PVC adequately supported along its entire run, especially the span between the two buildings? Is the support within the specified intervals? Is the support
listed and identified for use with PVC conduit? Improperly installed supports or insufficient supports can lead to sagging, breakage, and potentially pulling apart connections.2.

Expansion and Contraction



NEC 352.44 (Expansion Fittings)

PVC expands and contracts significantly with temperature changes. Long runs, especially exposed to sunlight, require expansion fittings.

What to look for

Are there expansion couplings installed in the run? The distance between expansion fittings depends on the temperature difference expected in your area (refer to NEC Table 352.44). Without these fittings, the conduit can buckle or pull apart at connections. This is especially critical in outdoor applications.
3.


Physical Damage



NEC 352.12(C) Uses Not Permitted (Exposed to Physical Damage)

While PVC is durable, it's not immune to damage. The code prohibits exposed PVC in areas subject to physical damage unless specifically protected.

What to look for

Is the conduit vulnerable to being hit by vehicles, equipment, or falling objects? If so, it might be considered subject to physical damage, and PVC may not be an appropriate wiring method or must be protected.4.

Secure Connections



NEC 352.48 (Joints)

Joints between sections of PVC conduit must be made with approved couplings and methods. They should be properly glued with PVC cement.

What to look for

Are the connections secure and properly made? Are there any signs of separation or cracking at the joints?5.

Raceway as Support
NEC 300.11(B)

Raceways can be used as a means of support for other raceways, cables or nonelectrical equipment only where designed for the purpose and identified as such.

What to look for

Is the raceway being used as a means of support for things it is not designed for? Is it identified for the specific application?

Other Considerations



Clearances

Does the conduit maintain proper clearances from the ground, walkways, or other structures? This is important for safety and accessibility.

Weather Resistance

Is the PVC conduit and all fittings rated for outdoor use and sunlight resistance (marked "SR")?


Proper Conduit Body

Conduit bodies are needed for access to pull conductors. Ensure the correct type of conduit body is used and is also secured.

What to Do


Take detailed photos

Capture the entire run, focusing on supports, connections, expansion fittings (or lack thereof), and any areas of potential damage.2.

Measure the spans

Determine the distance between supports to see if they comply with NEC 352.30.
3.


Consult the NEC

The actual NEC (National Electrical Code) is the final authority. Your local jurisdiction may also have amendments. Most libraries carry the NEC, or you can purchase it from the NFPA (National Fire Protection Association).4.

Consult a qualified electrician

A licensed electrician can assess the installation, identify code violations, and recommend corrective actions. This is the best and safest course of action.

In summary, the most likely issues are inadequate support (NEC 352.30) and the absence of expansion fittings (NEC 352.44). It is never recommended to have PVC conduit floating across to the building like in your installation
Disclaimer: I am an AI chatbot and cannot provide definitive electrical code interpretations. This information is for general guidance only. Always consult a qualified electrician and the latest edition of the NEC for accurate and code-compliant installations. Flag for review

Previous Question Next Question