Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Strut Support Image

User: Alwayslearningelec, Location: NJ

Asked on: Saturday, September 27, 2025 at 8:54 am EDT
Answered on: Sunday, September 28, 2025 at 3:31 am EDT

Question: Hello. Trying to build an assembly in my database. Looking for strut spanning across two I beams with the strut attaching at the flange. No threaded rod.I know it's a longshot but anyone have a pic of this? Looking for parts/pieces I would need at the flange to connect the strut. ]Thinking a beam clamp but how would strut attach directly to the beam clamp.

Okay, you're looking for a way to connect strut (likely Unistrut or similar) directly to the flange of an I-beam using a beam clamp, without using threaded rod. That's a common connection, and there are definitely ways to do it.Here's a breakdown of the parts you'll need and how they connect, along with possible solutions and considerations

Basic Components:
I-Beam

This is your existing structural member.


Strut

This is the Unistrut (or equivalent) that you want to attach.

Beam Clamp

This is the key component. It clamps onto the I-beam flange. You need to select the right type for your I-beam size and loading requirements.


Strut Attachment Hardware

This is how you directly join the strut to the beam clamp. This is where you have options.

Here's a visual breakdown and a common solution

[Image of I-Beam with Beam Clamp and Strut Direct Attachment would go here]

The Solution: Beam Clamp with Strut Attachment Point


Many beam clamp manufacturers make specific beam clamps designed to directly accept strut. These clamps typically have one or more of the following features: A pre-drilled hole or slot

This is designed to align with a hole in the strut channel.


A tapped hole (threaded hole)

This is designed for a bolt to pass through the strut channel and screw directly into the clamp.

A welded boss with a threaded hole

Same as above, but the threaded hole is contained in a small block of metal that is welded to the clamp body

How it works


Select the Correct Beam Clamp

This is
crucial. You need to know:

I-Beam Flange Thickness and Width

Beam clamps are sized for specific flange dimensions. Check the manufacturer's specifications.

Load Requirements

How much weight will the strut support? The beam clamp must be rated for that load (and then some – safety factors are important!).


Desired Strut Orientation

How do you want the strut to be oriented relative to the I-beam?

Material Compatibility

Important to make sure the clamp and the beam are not dissimilar metals to avoid galvanic corrosion.2.

Attach the Beam Clamp

The beam clamp is usually tightened with a wrench. Ensure it's properly seated and torqued according to the manufacturer's instructions.3.

Attach the Strut



If the beam clamp has a pre-drilled hole/slot

Line up a hole in the strut with the hole/slot on the beam clamp. Use a bolt, washer, and nut to secure them together.

If the beam clamp has a tapped hole

Line up a hole in the strut with the tapped hole on the beam clamp. Use a bolt and washers to secure them together.

Specific Beam Clamp Types to Look For



Beam Clamps with Strut Nut

Some beam clamps are designed to accept a strut nut inside the strut channel. You would then use a bolt through the clamp into the strut nut.

Universal Beam Clamps

Some brands offer a type of beam clamp that uses an adapter that can be bolted to the clamp and provides a mounting point for strut or other hardware.

Brands/Manufacturers to Explore



Unistrut

Obviously, they have a wide range of strut fittings, including beam clamps.

B-Line (Eaton)

A major player in strut and cable support systems.


Caddy (Erico)

Known for innovative fastening solutions.

Thomas & Betts (ABB)

A well-known manufacturer of electrical and mechanical components.

Important Considerations



Load Capacity

Always check the load ratings of the beam clamp and the strut. Over-engineering is better than under-engineering.

Local Codes and Regulations

Make sure your connections meet any applicable building codes or safety regulations. A structural engineer may be needed, depending on the application.


Corrosion

If the environment is corrosive (e.g., coastal areas, chemical plants), choose beam clamps and hardware made from corrosion-resistant materials (e.g., stainless steel, galvanized steel).

Vibration

If the connection is subject to vibration, use lock washers or locking nuts to prevent loosening.


Proper Installation

Follow the manufacturer's instructions carefully.

How to find the right parts


Determine I-Beam Dimensions

Accurately measure the flange width and thickness.2.

Determine Load Requirements

How much weight does it need to support?3.

Search Online

Search for "beam clamp strut attachment" or "I-beam clamp Unistrut." Include the dimensions of your I-beam in your search.4.

Consult a Supplier

Go to a local electrical supply house or industrial hardware supplier. They can help you select the right components. Bring your I-beam dimensions and load requirements.

Example Search Terms:
"I-beam clamp for 1-5/8 strut" "beam clamp flange 6 inch wide"* "unistrut beam clamp no thread"Good luck with your assembly! Remember to prioritize safety and code compliance. If you are unsure, consult a qualified engineer or contractor. Flag for review

Previous Question Next Question