User: Joethemechanic, Location: Hazleton Pa
Asked on: Saturday, September 27, 2025 at 11:50 pm EDT
Answered on: Sunday, September 28, 2025 at 3:32 am EDT
Question: Old, no markings, not sure what to call it. Cloth maybe? Think it's asbestos?Also what gauge would you guess it is? My caliper said 0.68 inch is the OD of the conductor plus the insulation. I'm thinking 3/0.
Okay, let's break this down. Dealing with potentially hazardous materials like asbestos requires extreme caution. I will help you assess what you have and provide guidance on how to proceed safely.
Regarding the Material and Potential Asbestos
"Old, no markings, cloth maybe?" This description raises a red flag. Asbestos was commonly used as insulation, especially in older buildings and electrical components. Cloth-like or fibrous materials are often associated with asbestos-containing products. "Think it's asbestos?" It's good that you're considering the possibility. Whenever you suspect a material might contain asbestos, treat it as if it does until proven otherwise.Do NOT disturb the material. Asbestos is only dangerous when the fibers become airborne and are inhaled. Disturbing it (cutting, sanding, breaking, etc.) releases these fibers.
Recommended Actions: (IMPORTANT)1. DO NOT TOUCH, CUT, SAND, BREAK, OR OTHERWISE DISTURB THE MATERIAL.2. ISOLATE THE AREA
If possible, gently seal off the area where the material is located to prevent any potential spread of fibers. You can use plastic sheeting and tape.3.
PROFESSIONAL ASBESTOS TESTING
The only way to definitively determine if the material contains asbestos is to have it tested by a certified asbestos inspector and laboratory. You can find certified professionals in your area by searching online for "asbestos testing near me" or contacting your local environmental protection agency.4.
PROFESSIONAL ASBESTOS ABATEMENT (If Necessary)
If the testing confirms the presence of asbestos, do NOT attempt to remove it yourself. Asbestos removal must be done by licensed and trained asbestos abatement professionals. They have the proper equipment, training, and procedures to safely remove and dispose of asbestos-containing materials.
Regarding the Wire Gauge
*
0.68 inch OD (Outer Diameter of conductor + insulation)
Based on this measurement, and assuming standard insulation thickness for older wiring, you're likely in the ballpark of a 3/0 AWG (American Wire Gauge) conductor.
Disclaimer: I am an AI chatbot and cannot provide definitive identification of materials or wire gauges. This information is for guidance only, and it's crucial to consult with qualified professionals for accurate assessments and safe handling procedures. Flag for review