Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Box Question

User: Alwayslearningelec, Location: NJ

Asked on: Tuesday, September 30, 2025 at 11:20 am EDT
Answered on: Tuesday, September 30, 2025 at 11:20 am EDT

Question: Anyone know if there is a steel wall box for a 6 port IT device that could accept 2" conduit? Thanks

Yes, steel wall boxes that can accommodate a 6-port IT device and 2" conduit do exist, although finding a pre-configured "off-the-shelf" solution might be tricky. Here's a breakdown of what you're likely looking for and where to find it

Key Considerations:
Size

6 ports require a decent amount of space for the device itself and cable management. Make sure the box is deep enough.


Knockouts

You need knockouts that are sized for 2" conduit. Some boxes might have smaller knockouts (1/2", 3/4", 1") that you could potentially enlarge, but this is generally not recommended unless you have the correct tools and experience, as it can compromise the integrity of the box and violate code.

Mounting

How will the IT device mount
inside the box? Some boxes have pre-drilled mounting holes or DIN rails. You might need to add your own mounting brackets.

NEMA Rating

Consider the environment. Is it indoor, outdoor, wet, or dusty? You might need a NEMA-rated enclosure for protection. (NEMA 1, NEMA 3R, NEMA 4, NEMA 4X, NEMA 12, etc.)

Material

You specifically want steel. Make sure it is appropriately finished (e.g. powder-coated, galvanized) to prevent rust.


Code Compliance

Ensure the installation complies with local electrical codes and IT cabling standards. A licensed electrician should be consulted.

Where to Look


Electrical Supply Houses

This is your best starting point. Talk to a knowledgeable salesperson. They are familiar with enclosures and can guide you to products that meet your needs. They often carry:

Pull Boxes/Junction Boxes

Larger steel boxes with knockouts. You might need to add mounting hardware for the IT device.


NEMA Enclosures

These are designed for industrial environments and often come in various sizes and NEMA ratings. They can be more expensive than simple pull boxes.

Custom Fabrication

Some electrical supply houses can arrange for custom fabrication of enclosures to your specifications. This would be a more expensive option but would give you exactly what you need.2.

Industrial Supply Companies

Grainger, McMaster-Carr, and similar companies carry a wide range of enclosures, including steel options. Search for "steel enclosure," "junction box," "pull box," or "NEMA enclosure." Filter by size and knockout size.3.

Online Retailers (with caution)

Amazon, eBay, etc., sell enclosures, but it's harder to be sure about quality and suitability. Read reviews carefully and verify the specifications.4.

IT/Networking Equipment Suppliers

Some suppliers who sell the IT device itself might offer compatible enclosures, but they are less likely to carry steel boxes designed for 2" conduit.

Keywords to Search

"Steel Junction Box" "Steel Pull Box" "NEMA Steel Enclosure" "Steel Wall Mount Enclosure" "Steel Equipment Enclosure" "Electrical Enclosure" "[Size] Steel Enclosure" (e.g., "12x12x6 Steel Enclosure")

Example Scenario

Let's say you have a small 6-port switch or media converter that's roughly 6" x 8" x 2" in size. You might look for a steel enclosure that's at least 12" x 12" x 6" to provide enough room for the device, cable management, and the 2" conduit entry.

Important Considerations Before Buying



Draw a Diagram

Sketch out how you want to mount the IT device, where the conduit will enter, and how you'll manage the cables. This will help you determine the necessary box size and features.


Measure Carefully

Measure the IT device, including any connectors or power supplies, to ensure it will fit comfortably inside the enclosure.*

Consult an Electrician

Before purchasing and installing, it's wise to consult a qualified electrician to ensure the installation meets code and is safe. They can advise on the appropriate enclosure type and installation methods.

In summary, a standard "6-port device + 2 inch conduit" steel wall box isn't a common off-the-shelf item. You'll likely need to adapt a larger junction box or NEMA enclosure and potentially add your own mounting hardware. Start with a visit to your local electrical supply house.
Flag for review

Previous Question Next Question