Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: FAULT CURRENT/ARC FLASH STUDIES

User: LECTRICBOSS, Location: MOORE, OK. USA

Asked on: Tuesday, September 30, 2025 at 4:44 pm EDT
Answered on: Tuesday, September 30, 2025 at 4:44 pm EDT

Question: HOW FAR SHOULD YOU GO ON AN ARC FLASH/FAULT CURRENT STUDY? SHOULD YOU DO AIR CONDITIONING UNITS, OVERHEAD GAS UNIT HEATERS?

The depth and scope of an arc flash/fault current study should be determined by a comprehensive risk assessment that considers several factors. There's no single "right" answer, but here's a breakdown to guide your decision

Factors to Consider:
Legal and Regulatory Requirements

OSHA, NFPA 70E, and potentially local codes mandate arc flash hazard assessments. These regulations provide a framework, but you'll need to tailor your study to your specific facility.


Risk Tolerance

How much risk are you willing to accept? This is a key business decision. A more conservative approach will involve a wider scope of study.

Available Resources

Budget, time, and the expertise of qualified personnel are all constraints.


Complexity of the Electrical System

A simpler system might require a less comprehensive study than a complex industrial facility.

Age and Condition of Equipment

Older or poorly maintained equipment can increase the likelihood of faults and should be prioritized.


Frequency of Interaction

How often do workers interact with the equipment? More frequent interaction means a higher risk.

Equipment Type and Function

Critical equipment (e.g., emergency power systems, life safety systems) usually warrants a more thorough analysis.

General Guidelines and Considerations


Start with the Main Distribution and Downstream



Main Switchgear/Panelboards

This is a must. They are the source of power and often have the highest fault current potential.

Subpanels

Essential, as they distribute power to various areas.


Motor Control Centers (MCCs)

Very important, as they control motors, which are a common source of faults.

Transformers

Crucial for understanding voltage and current transformations throughout the system.2.

Determine the Lower Limit

Deciding where to stop the study requires careful consideration. Here's a tiered approach:


Tier 1: Essential Equipment

Include all equipment that is essential for the business to function or where downtime has significant consequences. Consider the equipment's role in production, safety, and essential building services (lighting, elevators, etc.).

Tier 2: Commonly Accessed Equipment

Include equipment that is frequently operated, maintained, or troubleshot. This often includes equipment in accessible areas.


Tier 3: All Equipment

The most comprehensive approach. Include all equipment in the electrical system. While costly, this provides the best overall safety picture and may be warranted in high-risk environments.3.

Specific Equipment Considerations - HVAC and Gas Unit Heaters



Air Conditioning Units (Especially Large Units)



Consider studying them.
Large AC units often have significant electrical loads and may be fed from dedicated panels or breakers. Their potential contribution to fault current should be assessed, and arc flash hazards at the equipment itself should be evaluated if workers interact with it during maintenance or repair. Factors to prioritize

Size (horsepower/kW), voltage, location (e.g., rooftop vs. ground level), maintenance frequency. Large commercial or industrial units are more likely to warrant inclusion.


Less likely to need a full study

Small window units or units powered by a standard 120V/240V outlet are generally excluded.

Overhead Gas Unit Heaters



Generally, less critical unless they are large or integral to a safety system.
Most gas unit heaters have a relatively small electrical load (e.g., for fans or controls). Examine the electrical supply

If the heater is hardwired to a dedicated circuit or panel,
briefly consider its fault current contribution.

Unless there's something unusual (e.g., a very large industrial heater with a significant electrical draw), they can often be excluded from a detailed arc flash analysis.
4. Documentation is Key

Clearly document the scope of the study and the rationale behind any exclusions. This demonstrates due diligence. Record the criteria used to determine which equipment was included and excluded. Update the study regularly (typically every 3-5 years, or whenever significant changes are made to the electrical system).

Practical Steps


Walk-Through and Inventory

Perform a thorough walk-through of your facility to identify all electrical equipment. Document voltage, current, and equipment location.2.

Single-Line Diagram

Create or update a detailed single-line diagram of your electrical system. This is essential for the arc flash study.3.

Consult with a Qualified Electrical Engineer

Arc flash studies are complex and require specialized knowledge. Engage a qualified electrical engineer with experience in arc flash analysis. They can help you determine the appropriate scope of your study and ensure accurate results.4.

Prioritize Based on Risk

Focus your initial efforts on areas with the highest potential arc flash hazards and the most frequent worker interaction.

In Summary:


The decision of how far to go on an arc flash study is a balance between risk mitigation, cost, and available resources. A well-defined scope, based on a thorough risk assessment and expert consultation, is essential for creating a safe and compliant electrical workplace. Don't assume that just because something
could be included, that it should* be included. Use the risk assessment to guide your decision-making process. Flag for review

Previous Question Next Question