Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Total Capacity of Service Switches

User: paullmullen, Location: Wisconsin

Asked on: Wednesday, October 1, 2025 at 10:29 am EDT
Answered on: Wednesday, October 1, 2025 at 10:30 am EDT

Question: I am working in a municipality where I have not worked before. The AHJ is a generalist without Electrical as his main discipline. Asking him some specifics about the electrical permit application has led to some reasonable (general knowledge) answers that have unreasonable (specific electrical knowledge) implications.He is a really terrific guy and I love working with him, so this is not a dig at the AHJ.However, I still want to complete the application in a thoughtful way. How would you interpret lines 10-12 of the application? I'm thinking this is the size of the first means of disconnect. Thoughts?

You're right to approach this delicately, especially when working with a new AHJ you respect! Let's break down those lines and how to interpret them

Understanding the Purpose of Lines 10-12

Generally, permit applications are designed to collect enough information for the AHJ to assess the scope and safety of the proposed electrical work. Lines focusing on disconnects usually aim to identify: Service Size

The overall capacity of the electrical service being installed or modified. This is a key factor in determining if the existing infrastructure can handle the new load.


Overcurrent Protection

The size and type of the main overcurrent protection (e.g., circuit breaker, fuses) protecting the service. This ensures the service is properly protected from overload.

Disconnecting Means

The location and rating of the means to disconnect the electrical service from the building. This is critical for emergency situations and maintenance.

Interpreting Lines 10-12


Without seeing the exact wording of lines 10-12, I will provide a general interpretation assuming common terminology:
Line 10: "Service Size (Amps)" or "Total Connected Load (Amps)" - Likely refers to the total ampacity of the service conductors feeding the building or the calculated demand load in amps for the proposed electrical system. Line 11: "Main Disconnect Rating (Amps)" or "Overcurrent Protection Rating (Amps)" - This almost certainly refers to the ampere rating of the first overcurrent protection device that will open to protect the service conductors. This is typically the main circuit breaker or fuses located at the service entrance. This also serves as the rating of the first means of disconnect. Line 12: "Number of Circuits" or "Total Number of Branch Circuits" - This asks for the total number of branch circuits that will be installed as part of this electrical work.

Your Thought: "Size of the first means of disconnect"

You're absolutely on the right track. The `Main Disconnect Rating` (Line 11) is directly tied to the size of the first (main) disconnecting means. They are essentially the same thing. The disconnect must be rated to handle the maximum current that the overcurrent device is designed to interrupt.

How to Proceed Thoughtfully1. Get the Exact Wording

Obtain the precise wording of lines 10-12 from the permit application. This will eliminate any ambiguity.2.

Context Matters

Consider what you're applying for a permit for. Is it a whole new service? A significant upgrade? A single circuit addition? The scope of the project will influence how you fill out these lines.3.

Accompany the Application with Supporting Documentation

To proactively address potential questions, include the following with your application:

Load Calculation

A detailed load calculation showing how you arrived at the "Service Size (Amps)" figure. This is
always a good practice.

One-Line Diagram

A simplified one-line diagram of the electrical service, clearly showing the service entrance, main disconnect, overcurrent protection, and major distribution panels.

NEC References

Briefly cite the relevant sections of the National Electrical Code (NEC) that you used to determine the service size, overcurrent protection, and disconnect rating. Examples include:
NEC Article 220: Branch-Circuit, Feeder, and Service Calculations NEC Article 230: Services4.

Prepare Your Explanation

Be ready to explain your reasoning to the AHJ. Frame it in terms of code compliance and safety. For example:
"We've calculated the service load according to NEC Article 220, and it requires a minimum service size of [X] amps." "The main disconnect is rated at [Y] amps, which is sized to protect the service conductors and is in compliance with NEC 230.90."5.

Offer to Discuss

If you're unsure, proactively offer to schedule a brief meeting with the AHJ to review the application and answer any questions. This shows respect and a willingness to collaborate. You could say something like, "I've prepared the electrical permit application and wanted to see if you had a moment to look it over. I'm happy to walk you through the calculations and ensure we're both on the same page."

Example Scenario

Let's say you're installing a new 200A service.


Line 10: "Service Size (Amps)"

200

Line 11: "Main Disconnect Rating (Amps)"

200


Line 12: "Number of Circuits":
(Depends on the load - example: 12)In your documentation, you would include your load calculation showing why a 200A service is adequate, and you would note that the 200A main breaker serves as both the overcurrent protection and the disconnecting means.By being thorough, providing supporting documentation, and communicating respectfully, you can ensure a smooth permitting process and maintain a positive working relationship with your AHJ. Remember, he will have the final say in what is approved. Flag for review

Previous Question Next Question