Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Square D Breaker ID

User: Seven-Delta-FortyOne, Location: Humboldt

Asked on: Wednesday, October 1, 2025 at 5:51 pm EDT
Answered on: Wednesday, October 1, 2025 at 5:52 pm EDT

Question: I need to add another of these. We do not have a Square D dealer in our area, it’s all Eaton, so I don’t work with Square D much at all.I’m trying to save myself the 200 mile round trip to the job site to open the switch gear and find a model number. Does anyone here know off the top of their head what model that is? I need to submit the cut sheet before I can even order it.Many thanks in advance.

Okay, I understand. You need the Square D model number for the pictured electrical component so you can get a cut sheet and order a compatible replacement, and you're trying to avoid a long trip to the job site.

What we can deduce from the photo



It is a Square D product.
(You stated that.) It is a molded case circuit breaker. (The visible features confirm this.) It's likely a fairly large breaker. (Based on the size relative to other components in the panel.) The amperage rating could be found on the breaker, but it isn't visibly clear in the photo.The problem

Without seeing the full nameplate on the breaker, giving you an exact model number is impossible. There are many Square D breaker series and variations.

The most likely possibilities

Considering the apparent size and likely application in switchgear, here are a few Square D breaker series that are common:

PowerPact L-Frame

These are robust breakers used in many industrial and commercial applications.


PowerPact H-Frame

Another common series, often used in distribution equipment.

Masterpact NW or NT

These are larger, drawout-style breakers, but less likely if this is a smaller piece of gear.

What you MUST determine to select the correct breaker


Amperage Rating

The most critical factor. Find this if at all possible.2.

Voltage Rating

Make sure the voltage rating meets or exceeds the system voltage. (e.g., 480V, 600V)3.

Interrupting Rating

(kA) This is the breaker's ability to safely interrupt fault currents. It MUST be adequate for the available fault current at the installation point.4.

Frame Size

This relates to the physical dimensions and mounting. This needs to match.5.

Trip Unit Type

(Thermal-Magnetic, Electronic, etc.) This determines how the breaker protects against overloads and short circuits. If this breaker is feeding sensitive loads it is more likely to have a electronic trip unit.6.

Number of Poles

(1, 2, or 3) This should be obvious from the visible breaker.7.

Accessories

(Shunt Trip, Auxiliary Switch, Undervoltage Release) These are add-on features for remote control or indication.

Recommendations to Find the Model Number or Required Specifications



Ask the facility maintenance staff

They may have records of the equipment or be able to read the nameplate information for you. If they have a ladder and can take a clear picture of the breaker label that would be great.

Check existing documentation

Look for panel schedules, single-line diagrams, or previous maintenance records.


Contact the switchgear manufacturer (if known)

If you know who built the switchgear, they may be able to provide the breaker information based on the gear's serial number.

If you absolutely cannot get the exact model


Take very precise measurements

Carefully measure the breaker's dimensions (height, width, depth, mounting hole locations).2.

Document the visible features

Note the type of handle, any visible markings, and any accessories.3.

Consult with a Square D distributor (even if remote):
Send them the photo and all the information you have. Explain your situation. They may be able to narrow down the possibilities.I hope this helps! Let me know if you get any additional information. Flag for review

Previous Question Next Question