Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: heater underneath tub?

User: JoeNorm, Location: WA

Asked on: Thursday, October 2, 2025 at 11:11 am EDT
Answered on: Thursday, October 2, 2025 at 11:11 am EDT

Question: Customer is building up a platform where a tub will go. He want's me to rough in a wire for a heater underneath the tub. Is this allowed?I could put it on a GFCI breaker.

Okay, let's break down the situation and the code considerations for wiring a heater under a bathtub platform.

The Core Question: Is it Allowed?

Generally, directly heating the underside of a bathtub with an electric resistance heater is not a standard or approved practice and may violate electrical and building codes. The main concerns are: Moisture and Water Proximity

Bathtubs and their surrounding areas are inherently wet. Electricity and water are a dangerous combination. While you can use GFCI protection, it does not make an electrical device approved for use in a wet environment


Heating the water directly
: Electric heaters that are used to heat the water directly need to meet very specific requirements to ensure the safety of the user Approval and Listing

Any electrical device used MUST be listed by a recognized testing laboratory (UL, ETL, CSA, etc.) for its intended use. It's highly unlikely you'll find a readily available heater specifically designed and listed for heating the underside of a bathtub. Using a non-approved device violates code and voids insurance.


Material Compatibility

The platform's material (wood, composite, etc.) might not be compatible with the heat generated by the heater, potentially creating a fire hazard.

Access for Maintenance/Repair

Under-tub spaces are often difficult to access. If the heater needs repair, gaining access can be problematic.


Potential for Overheating

Without proper controls and safety measures, the heater could overheat and cause damage or fire.

Why a GFCI Breaker Isn't a Complete Solution


While using a GFCI breaker is essential for any electrical circuit in a bathroom (especially near water), it's not a magic bullet that makes an unsafe installation safe. A GFCI protects against ground faults (electricity leaking to ground), which can prevent electrocution. It doesn't prevent overheating, fires from incompatible materials, or other hazards associated with an unapproved installation.

What You Can Do (and Should Do Instead)1. Inform the Customer

The most important thing is to explain to the customer why this is not a standard or recommended practice and may violate code. Clearly outline the safety concerns and potential risks. Document that you have provided this information.2.

Suggest Alternatives



In-Line Water Heater

Recommend an in-line water heater to keep the water warm for longer. These are designed for this purpose and are UL-listed.


Heated Tub Options

Suggest tubs that have built-in heating systems designed for this purpose.

Radiant Floor Heating in the Bathroom (Not Directly Under the Tub)

Consider installing radiant floor heating in the bathroom itself. This will make the entire bathroom, including the floor around the tub, warmer and more comfortable. It's a safer and more code-compliant solution. Make sure it's installed by a qualified electrician according to all applicable codes.


Insulation

Better insulation under the tub can help retain heat in the water longer.

In summary, do not install a heater under the bathtub platform for the purpose of directly heating the water. Explain the risks to the customer, and suggest code-compliant and safe alternatives.
Flag for review

Previous Question Next Question