User: Alwayslearningelec, Location: NJ
Asked on: Tuesday, October 7, 2025 at 4:19 pm EDT
Answered on: Tuesday, October 7, 2025 at 4:23 pm EDT
Question: Sorry know I asked this before. Does the part of the hub that goes onto the conduit have internal threads, so it gets threaded onto the RMC conduit?Also Myers hub is a trade name of the connector?https://www.eaton.com/content/dam/eaton/products/conduit-cable-and-wire-management/crouse-hinds/literature/crouse-hinds-myers-hub-brochure.pdf
Yes, you are correct on both counts: Internal Threads
The part of a standard Myers hub that connects to the Rigid Metal Conduit (RMC) has internal threads designed to be screwed onto the external threads of the RMC conduit. This creates a secure and weatherproof connection.
Myers Hub is a Trade Name: "Myers Hub" is indeed a trade name, specifically belonging to Crouse-Hinds (now Eaton). It's a widely recognized brand name for this type of conduit fitting. While other manufacturers make similar fittings, they are generally called "insulated grounding bushings" or "conduit hubs" or have their own brand names. The term "Myers Hub" has become somewhat genericized in the electrical trade to refer to these types of connectors.So, to summarize: The RMC conduit threads into the inside of the connector. "Myers Hub" is a well-known brand name for an insulated grounding bushing conduit fitting. Flag for review